Screen Clear, NX5 RS250R (1995 NSR250 Style)
€52.00
Screen Clear, Honda NX5 RS250R
TYGA no: SCRE-0176
SKU: hon-10981 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopFork cap kit, Honda RVF750R RC45
€317.71
After 20 years or so of use, many RC45’s have damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any R45 restoration and install exactly the same as the original Honda ones.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
Removal and refitting of the original RC45 rebound damper rod is required, so please follow the instructions carefully.
Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
€920.57
Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
Modelled closely from the front fairing set taken off an actual NSR500V HRC factory machine, this kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but to allow it to fit the NSR250 with correct mounting points and clearances. This fairing set can be installed with both the MC28 and the MC21, (and possibly the MC18, though we have not tried that model).
The set consists of the parts shown below and has a special TYGA designed triple beam LED headlight unit subtly located in what would normally be the front air duct. All special mounting hardware and windscreen is provided. Note, you do not need to change the meter stay for either the MC21 or MC28 models to install this fairing which bolts to the stock meter and rear frame spar side stay and lower stay locations with all hardware provided.
The fairing can be used with stock and all TYGA exhaust systems including use with the specially designed 250V exhaust system EXCS-0047
We recommend installing this fairing set with seat set BPFS-0196 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0195
SKU: hon-11055 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Triple clamp set CNC black, Honda RVF400 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC35
CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1742
SKU: hon-10555 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, ShopSet exhaust without header, race system without silencers
€409.54
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage.
Compatiblity: This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0061, EXPS-0062, EXPS-0091 and EXPS-0092 for systems complete with silencers.
TYGA no: EXPS-0093
SKU: ktm-10094 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopTriple Clamp Set, CNC Black, NC35 Forks to fit MC28
€588.29
Triple Clamp Set, CNC Black, NC35 Forks to fit MC28
This CNC machined triple clamp set has been modified from the ‘normal’ NC35 design to allow MC28 owners to fit NC35 forks to their machine.
The difference between the NC35 clamps and these is that we have replaced the steering shaft with one of suitable length for the MC28.
Fairingstay Aluminium, Suzuki RGV 250
€130.42
This fairing stay is not only very light, but also looks very good.
Direct replacement of stock item, constructed in 6061 Aluminium. Weighs approx. 200g.
Great update, not only for track days. But for RGV owners who like that GP look.
TYGA no: TYLY-0022
SKU: suz-10020 Categories: ALL products, RGV250 VJ22, Shop, Suzuki, Universal parts, Various partsVHM Cyl. Headset Honda CR125 ’05-’07
€291.95 €265.17
VHM Cyl. Headset Honda CR125 ’05-’07 (alg-10211) AA33083VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.20cc)Optional inserts:– blind– 11.00– 11.40– 11.60This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33083Â Â Â Â Â Â Â Â
SKU: alg-10211 Categories: ALL products, Honda, Honda MX, Motocross, Shop, VHM products