Side mount lower cowling, Honda VFR400 NC30
€9.04
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPSY-0323
SKU: hon-11390 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30Lower cowling grp, Ninja 400
€200.66
Lower Cowling, (GRP), Ninja 400
Replacement Lower Cowling for TYGA Race Bodywork kit BPFS-0175
TYGA no: BPFL-7040
SKU: kaw-10143 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Exhaustset stainless steel carbon silencer round, Honda CBR125
€479.79
This full race system has been specifically designed for the CBR125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too!
TYGA no: EXPS-0006Â
SKU: hon-10277 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, Exhausts, Honda, ShopTriple Clamp Set, 3D, CNC Silver, CBR600RR forks to fit NC35
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3315
SKU: hon-11248 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all modelsAthena cylinder set with piston (pair), set 2 Aprilia RS250 – Suzuki RGV250
€1,369.21 €1,204.91
This cylinder kit is a direct replacement for the original (OEM) cylinder from Suzuki/Aprilia and this means it can be installed without making any changes to the engine crankcase. Same porting and all sizes the same.
TYGA no: P40001010001
SKU: alg-10445 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various parts, Various parts, Various partsFuel Tap / Pet Cock, MC21
€103.58
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 16950-KV3-682
SKU: hon-11273 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250 MC21, ShopInner cowling GRP stock “painted Red” , NSR250 MC21/MC28
€156.17
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: BPFC-0040RED
SKU: hon-11362 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, ShopSeat set RCV211, NC30 assy
€257.52
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPFT-9017
SKU: hon-10088 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30