Set pipe full race system WSS300 (no silencer), KTM Duke 390
€650.45
Set, Pipe, Race System, WSS300, No Silencer, KTM 390 Duke
This exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390 Duke. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
Note, this is a system with NO silencer
For complete system with silencer please see EXPS-0142
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
RC Valve Cable A, NSR150SP
€13.73
RC Valve Cable A, NSR150SP
TYGA no: 14330-KW6-840
SKU: hon-11172 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR150SPSteering Stopper, Main, Ninja 400
€24.24
Steering Stopper, Main, Ninja 400
Designed and manufactured in house by TYGA Performance, this stainless steel steering stopper restricts the amount of steering angle on the Kawasaki Ninja 400. Ideal for racing and preventing smashed thumbs from ‘tank slappers’. Installs in minutes. No special tools or dismantling of the bike required.
TYGA no: BPSY-0217
SKU: kaw-10097 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various partsMain step holder right, Honda MSX125 GROM
€72.27
Main step holder right OEM Honda part
TYGA no: 50600-K26-900
SKU: MSX-10027 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopHandlebar Clamp, Right, Silver, 41 mm.
€93.45
Replacement Right handlebar clamp for handlebar set TYLY-0077
Kit, Fairing Set, GRP, (Race) MC21, MC28, NSR250V
€610.53
Kit, Fairing Set, GRP, (Race) MC21, MC28, NSR250V
Modelled closely from the front fairing set taken off an actual NSR500V HRC factory machine, this kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but to allow it to fit the NSR250 with correct mounting points and clearances. This fairing set can be installed with both the MC28 and the MC21, (and possibly the MC18, though we have not tried that model).
The set consists of the parts shown below All special mounting hardware and windscreen is provided. Note, you do not need to change the meter stay for either the MC21 or MC28 models to install this fairing which bolts to the stock meter and rear frame spar side stay and lower stay locations with all hardware provided.
The fairing can be used with stock and all TYGA exhaust systems including use with the specially designed 250V exhaust system EXCS-0047
We recommend installing this fairing set with seat set BPFS-0198 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0197
SKU: hon-11056 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Lower Cowling (GRP), NSR250, MC21/MC28 Stock Shape, Painted Rothmans
€595.33
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFL-9001Painted
SKU: hon-10973 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, Shop, SilencersClutch Steel Plate B, MC28SP
€27.26
Clutch Steel Plate B, MC28SP
TYGA no: 22322-KV3-780
SKU: hon-11153 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28