Carbon ignition cover, Honda VFR400/RFV400
€119.92
This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Approx weight 0.09 kg
TYGA no: BPCC-9004
SKU: hon-10486 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Cowling left flat black, Honda MSX125 GROM
€23.35
Cowling left flat black, OEM Honda part
TYGA no: 77225-K26-900ZH
SKU: MSX-10320 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon airducts (pair) satin , Honda CBR250 MC22
€317.07
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCX-7110satin
SKU: hon-11463 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersSilencer stainless round, WSS300 (race) system, KTM RC390
€406.03
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0109
SKU: ktm-10200 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsTYGA bike dust cover Red/black Force V4 Honda wing
€76.13
TYGA Bike Dust Cover, Blue, Rothmans Honda
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0169
SKU: hon-11314 Categories: ALL products, Bike covers, By model, Honda, Merchandise, Shop, Universal parts, Various parts, VFR400RR NC30Silencer aluminium round /carbon end cap 380mm (4 stroke) 2
€271.40
Silencer, Aluminium/Carbon End Cap, Round, 2 x 380 mm., Assy.
This silencer has a tough anodized aluminium tube and carbon exit cap for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0140
SKU: alg-10136 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Tyre warmer 1 piece, replacement
€139.28
All new TYGA Tyre warmers are specifically designed to meet the needs of every racer and track day rider.
Fully adjustable, digital temperature control allows you to set your tyre temperatures to suit every situation with just a press of a button. The remote control box allows for quick and easy monitoring of temperatures.
Tyre warmers are an essential tool for any track excursion. For the racer it allows for lightening first lap action to get the jump on your competitor, and for the track day specialist there’s no more wasted laps trying to get heat into your tyres.
Another great feature is that you can refit the warmers between session and just set at a lower temperature to stop your tyres heat cycling . This gives you more tyre grip for longer, so your tyre won’t go off half way through the day.
These wamers are designed for Superbikes running the usual 120 front tyre, and 190-200 section rear tyre.
TYGA tyre warmers are designed to run on 220V, and use a C type plug. Power rating is 550W rear and 450W front.
TYGA no: TWDS-0007
SKU: alg-10310 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR900RR 1992- 95, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, Honda, Kawasaki, Shop, Suzuki, Tyre warmers, VFR750R RC30, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, ZX10R 2011 -15Rubber shield head Light, Honda VFR400 NC30
€17.72
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPAC-0016
SKU: hon-11397 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30