Upper Cowling Street (GRP), MC18 GP-T, Assy.
€257.70
Upper Cowling Street (GRP), MC18 GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the MC18 a contemporary look. This upper cowling utilizes stylish twin double unit LED headlight units, BPLT-0027. Together with lower cowling BPFL-9035 and other mounting hardware it comprises set BPFS-0157.
This cowling is supplied with a plastic bung to mount to the meter stay.
Compatible parts:
BPFL-9035 Lower Cowling
TYLY-0121 Upper Stay
TYLY-0154 Meter Stay
BPSY-0143A Side Stay Kit
TPER-0013 Steering Stopper
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
Silencer stainless round, WSS300 (race) system, KTM RC390
€406.03
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0109
SKU: ktm-10200 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsTriple clamp set CNC black, Honda CBR250 MC22 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 48 mm / 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks on the lower clamp, please change options below)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-1012 when installing this triple clamp set for best clearance issue with the CBR250RR clocks and fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1230
SKU: hon-11230 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersClutch Friction Plate, NSR150SP
€13.08
Clutch Friction Plate, NSR150SP
TYGA no: 22201-KW6-900
SKU: hon-11156 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR150SPBrake lever titanium, NC30 NC35
€39.67
CNC machined from solid billet, this lever replaces the main section of the lever assembly and attaches to to the stock Honda adjuster and plunger to maintain that OEM feel. Easy to install.
These levers are designed to fit most of the Honda sports bikes of the 1990s:
MC19, MC22, MC18, MC21, MC28, NC23, NC29, NC30, NC35, RC30, RC40, RC45 etc.
TYGA no: LEVB-6011
SKU: alg-10053 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, VFR400RR NC30O-Ring, Main shaft, MC21/28SP
€2.18
O-Ring, Main shaft, MC21/28SP
TYGA no: 91303-KV3-780
SKU: hon-11076 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28TYGA step kit replacement right side Hanger, Hawk/Bros
€43.99
TYGA step kit replacement right side Hanger, Hawk/Bros
TYGA no: STAH-0015
SKU: hon-10927 Categories: ALL products, By model, Hawk/Bros 400/650, Honda, Shop