Tyga Step Kit Replacement Link Rod, 238mm
€16.92
Tyga Step Kit Replacement Link Rod, Male, 238 mm.
Uses M8x1.25 thread in one end and M8x1.25 L/H thread in the other. 238mm in length.
TYGA flywheel/RC valve remover, Honda NSR125/150/250/300
€135.99
This new, TYGA designed 2 in 1 combination tool is a flywheel puller and RC valve removing tool all in one handy package.
Saves space in your toolbox, and less clutter on the work bench.
How to use:
Familiarise yourself with the parts (see picture).
The tool is delivered ready for use as a flywheel puller. Just screw part D into the crank, then wind the (left hand) threaded main body (part A ) into the flywheel centre and pop the flywheel off by rotating part B clockwise. Part C is not used.
For removing the RC valve shaft remove part B completely and refit from the opposite end, screwing all the way home. Then slide in the part C . Position the tool over the valve shaft and wind part C onto the RC valve shaft (left hand thread). When fully home just rotate part B anti-clockwise to pull out the shaft. The RC valve shaft seal and E-clip will probably be damaged in the process, and should be replaced. Part D is not used.
22mm and 19mm spanners (not supplied) are required for correct operation.
*Note* This tool can be used on the NSR150 to remove the RC valve shaft, but will not fit the flywheel. Please use TYTO-0007 for this job.
TYGA no: TYTO-0014
SKU: hon-10329 Categories: ALL products, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Tools, Various parts, Various parts, Various parts, Various partsRacing step kit CNC silver, CBR250RR MC22
€301.92
Designed and built in-house by TYGA Performance using CAD/CAM software, these CNC machine- made step kits are manufactured from top grade aluminium. Uses carbon heel guard on left side hanger (the right side carbon brake/heelguard shown in the pictures is an optional extra and can be ordered with your step kit, part number BPCC-9002)
This step kit moves the peg position back 15 mm. and up 20 mm. from standard. Pitch of hanger to frame mounting holes is 106.4 mm. on left and 103.4 mm on right.
Set, 4 pieces Headlight adjustment springs
€1.82
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: exsg-0005
SKU: hon-11524 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsCarbon Meter Cover RGV250 VJ21
€31.39
Carbon Meter Cover RGV250 VJ21
Attractive carbon cover for Suzuki VJ21 RGV250 meter assembly.
For fitment, push it over the instruments on one side until the foam compresses a little, you will then notice that the cover will then slide freely in towards the centre of instrument a couple of mm, allowing you more slack so you can locate it on the opposite side of the instrument. You need to locate over both rev counter and temp gauge at the same time. Once in position and properly located, you will notice it will slide around somewhat so, pick out the backing tape and the adhesive will hold it into desired position on the foam instrument surround. Alternatively, remove backing before installation but be careful not to lose adhesion or let cover get stuck in wrong position before you are satisfied it is properly located.
Fits all VJ21 Models
TYGA no: BPCC-0055
SKU: suz-10135 Categories: ALL products, RGV250 VJ21, Shop, Suzuki, Various partsExhaust spring 4 stroke standard
€2.21
Exhaust spring 4 stroke standard (alg-10128)
“swivel head”
TYGA no: EXSG-0002
SKU: alg-10128 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR500R, Exhaust systems, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Kawasaki, KTM, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, RC 390, RVF400RR NC35, Shop, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93Airbox Carbon/kevlar, Honda NSR250 MC21/MC28
€635.04
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPCX-0007
SKU: hon-11071 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Undertray seat, Ninja 400
€60.24
Undertray, Seat, (GRP) Ninja 400
Replacement undertray for TYGA Seat Cowling BPFT-7040(p)
TYGA no: BPFX-7040
SKU: kaw-10136 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-