Race airbox, ram air , Honda RVF400
€121.65
This race airbox has a larger and longer inlet than stock to allow for greater airflow and better breathing including ram air affect. Unlike other similar products available, as well as the modified inlet, this airbox increases the volume by 8% overstock for more stable performance. Uniquely, among aftermarket suppliers, the Tyga airboxes retain the correct profile on the base for an effective seal when installed just like the original airbox.
NOTE: This airbox will also fit the Honda VFR400, but you will need to shorten the airduct. Because of the cross beam on the frame is in a different position, it would hit the air duct at the front.
TYGA no: BPFX-9109
SKU: hon-10361 Categories: ALL products, High performance, High performance, High performance, Honda, RVF400RR NC35, Shop, VFR400RR NC30Set full race system with stainless silencer with carbon cap, Honda MSX125 GROM
€480.85
Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap, First Generation
This full race system has been specifically designed for the MSX125 to maximise performance and looks.The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decbel killer for noise reduction.
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043), and Carbon Silencer (EXSL-0042).
A useful gain all through the range, increasing as the revs rise up to maximum.
The silencer was full bore. No decibel killer used.
Similar Products:
Please also see:
EXPS-0042 Moto Maggot System
EXPS-0041 Carbon Oval Silencer System
EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0052Â
SKU: MSX-10277 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopAluminium wheel spacer kit “silver” , KTM Duke – RC125/RC200/RC390
€52.47
Wheel, Aluminium Spacer Kit, KTM Duke – RC Series
Update your bike with this great TYGA performance, KTM power part!!
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: This product is only sold as a complete kit, and individual items are not available separately, sorry.
TYGA no: TPER-1003
SKU: ktm-10186 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, Shop, Various partsIgnition Switch Holder, CNC Black, KTM, RC Series
€121.39
Ignition Switch Holder, CNC Black, KTM, RC Series
This is a removable ignition switch/lock holder for our KTM RC series top triple clamps. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1073.
Suitable for the following models:
KTM RC125
KTM RC200
KTM RC250
KTM RC390
TYGA no: TYLY-1173
SKU: ktm-10111 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Stock list, all modelsFront cowling race RCV211, NC30 NC35 NC29
€152.38
This is a replacement part for bodywork set BPFS-0012, BPFS-0014 and BPFS-0020
TYGA no: BPFU-9120F.
SKU: hon-10093 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, CBR400RR NC29, Honda, RVF400RR NC35, Shop, VFR400RR NC30Cartridge, Long Strand Glass Wool, Four Stroke, 2
€29.01
Cartridge, Long Strand Glass Wool, Four Stroke, 2 1
This is a replacement glasswool cartridge ideal for repacking Tyga or other similar sized silencers. Easy to install, clean and long lasting. Overall length 450 mm. X 98 mm. diameter
TYGA no: EXGL-0004
SKU: alg-10281 Categories: 4 stroke exhaust sets, ALL products, Exhausts, SilencersFront Fork Preload Adjusters blue/red (Pair), Honda MC18/MC21/MC28/NC30
€262.31
Fork Caps, Full adjustment.
Many race replica street bikes are graced with adjustable suspension as standard, but as with many ‘so-called’ adjustable suspension systems on production bikes, the actual adjustment available is very limited. The manufacturer lets you adjust within very tight parameters so that it’s difficult to get the settings wrong.
The TYGA fork tops do away with this dictator attitude, allowing you to take control of your set-up.
The preload adjustment is increased, with an extra 4mm possible, and we also provide a full 20 clicks of rebound adjustment that works!
Another great feature is the easy-turn knob for rebound adjustment. No more fumbling around for the screw driver.
The fork tops are manufactured from top quality anodized 6061 T6 aluminium and come ready to install, and are a direct replacement for the standard parts. Securing to the fork tube is by a pin spanner that is provided.
Basic suspension rebuild skills are useful for fitting, but full instructions will be provided.
Fits MC21SE/SP, MC28SE, MC18SP & NC30.
Please note that these Fork Caps will not work with ‘R’ spec NSR forks, or ’89 NC30, as these are preload adjustment only type forks.
TYGA no: TYLY-0038
SKU: hon-10355 Categories: ALL products, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Exhaustset race Stainless steel (high level) double Stainless steel Silencers, NC30 NC35
€1,276.81
This exhaust system includes everything you need to replace the stock system. It includes, stainless pipe work, twin carbon silencers, springs, gaskets, silencer clamp, mounting stay and all other mounting hardware.
This system can be used with stock Honda or Tyga bodywork/subframes
Dynograph shows totaly stock 35 compared to modded bike , twin stack tyga system, 1 layer race foam, short stacks, 125 mains front and rear, standard cdi.
TYGA no: EXPS-0158
SKU: hon-11323 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30