Tank cover set, CBR250RR MC22
€239.46
This product is a set of two tank covers which are designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example. They use the original mounting points front and rear.
We recommend using a smear of silicone sealant where the two halves meet and round the filler cap for a secure and watertight seal
Manifold Clamp, Left, Yamaha RD350LC (4L0)
€30.28
Manifold Clamp, Left, Yamaha RD350LC (4L0)
This is a replacement part. When ordering chamber sets, this item is included in the price and you do not need to order this part separately.
Compatible with the following TYGA system:
EXCB-0044L
TYGA no: EXMC-0044L
SKU: yam-10067 Categories: ALL products, Exhausts, RD350LC 4L0, Stock list, all modelsTYGA bike dust cover Black (race), Aprilia Racing
€63.10
Specially made for your Aprilia.
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0180
SKU: apr-10113 Categories: ALL products, Aprilia, Bike covers, Merchandise, RS125, RS250, RSV125, Shop, Universal parts, Various parts, Various partsHandle bar tube TYGA,
€22.89
Handlebar Tube (Assy), Black. Suitable for both left and right sides.
The Handle bar diameter is 7/8” (22.2mm).
Comes fitted with plastic bungs in each end.
Seat cowling, Suzuki RGV 250 assy
€268.91
This seat cowling is to be used in our VJ22 kits, BPFS-0037and BPFS-0038.
This product is compatible with Sub frame TYLY-0028. Will not fit stock Suzuki subframe
TYGA no: BPFT-9026
SKU: suz-10063 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiTop triple clamp CNC black STREET, KTM RC390, 2014- 21
€486.77
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1831
SKU: ktm-10220 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all modelsTyga Step Kit Replacement Right Side Hanger, MC21/28 Riser Assy.
€76.20
Replacement right hanger for MC21/28 STAA-0018 TYGA Step Kit. Complete with mounting bolts and bushes.
Fork cap kit, Suzuki RGV250 Vj22
€317.71
After 20 years or so of hard use, many RGV’s damaged or scruffy fork caps. We know that it can really detract from an otherwise well restored bike if the fork caps are scuffed or dinged up. We therefore decided to reproduce the fork caps both for our collection and to offer to the public at the same time. CNC machined from 7075 T6 aluminium and brass and with the clear anodizing, just like the original OEM parts, these fork caps are the finishing touch of any RGV250 VJ22 restoration and install exactly the same as the original parts.
The 3 legged Spring Adjuster Plate is not included in this kit. Please reuse the original part.
TYGA no: TPER-0069
SKU: suz-10129 Categories: ALL products, CNC parts, Honda, RGV250 VJ22, Suzuki, Suzuki RGV250, Various parts