Triple clamp set CNC black, Honda CBR250 MC22 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 48 mm / 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks on the lower clamp, please change options below)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-1012 when installing this triple clamp set for best clearance issue with the CBR250RR clocks and fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1230
SKU: hon-11230 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersNeedle roller bearings, set MC16 and MC18 (R2J/R4J)
€51.65
Crankshaft Bearing, Right, NSR250 MC21/28
Genuine OEM KOYO main crankshaft bearing for your Honda NSR250 MC21/28.
See also TYPP-0012SET for set consisting of one each of the left, centre and right crank bearings.
TYGA no: TPER-5008
SKU: hon-11432 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18Seat set style RVF, VFR400 NC30 (no taillight holes)
€240.81
Seat Cowling (GRP), NC30, RVF Race Style, No Tail Light
RVF shape Race Seat Cowling without taillight holes. Single seat, direct replacement for use on the Honda NC30, styled the same as the RVF400 seat cowling but single seat style like the RC45.
Seat cowling support is included in kit. This seat cowling uses OEM seat pad.
Please note this product does not have taillight holes. For seat cowling with taillight holes, please order BPFT-9013.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM seat pad.
TYGA no: BPFT-9113
SKU: hon-10419 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Top End Rebuild Kit MC18, Cyl. A, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘A’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002A
SKU: hon-10878 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Screen GP500, Honda NSR250 MC21/MC28
€52.00
Screen GP500, Honda NSR250 MC21/MC28
This screen fits the TYGA bodywork
TYGA no: SCRE-0031- SCRE-0032
SKU: hon-10248-hon-10250 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28Handlebar Clamp, Left, Black, 50 mm.
€98.58
Handlebar Clamp, Left, Black, 50 mm.
Replacement handlebar clamp for handle bar set TYLY-1078
Tankcover front RVF, NC35
€92.82
This is a GRP reproduction of the stock OEM front tank cover for the NC35. It can be used either with a stock tank in the normal way or if ordered with BPFX-9201 to make a full tank cover for the NC35.
TYGA no: BPFX-9101
SKU: hon-10143 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopKit, Bodywork, GRP, stock shape, with GRP tank, NSR250 MC28, Painted Rothmans
€2,968.09
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0185
SKU: hon-10969 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, Silencers