Set exhaust pipe with stainless steel silencer, Yamaha R25/R3
€765.52
Set, Exhaust Pipe, Race System, Yamaha R25/R3, Stainless, Round Aluminium Silencer
This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. It uses a stainless oval silencer with carbon end cap to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatiblity
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.
Please also see EXPS-0072 EXPS-0073 and EXPS-0075 for similar system.
Performance and Dynograph
Please refer to dynographs
A) All Standard.
The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.
B) Airfilter/Airbox modification.
The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.
TYGA no: EXPS-0074
SKU: yam-10061 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Exhaust Chamber, Left, Side By Side Type, MC21/28
€349.54
This is the bare left side replacement chamber for EXCS-0005
Set, Pipe, Full Race System, Ninja 300R, Oval Carbon Silencer
€769.95
2013-2017, Set, Pipe, Full Race System, Ninja 300R, Carbon Oval Silencer
We have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 300 when used with the TYGA system*. Made in stainless steel with spring mounted Carbon Oval silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an Carbon oval silencer EXSL-0043
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0015.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 300 Exhaust pipe sections and silencers.
TYGA no: EXPS-0096
SKU: kaw-10068 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Set pipe Stainless full race system “maggot silencer”, Kawasaki ZXR400L
€827.77
Set, Pipe, Stainless, Full Race System, Stainless Maggot Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs.
As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
It uses the TYGA Moto Maggot silencer, this system may not comply to specific country noise emission regulations and is not homologated for street use. Actually it is extremely loud so be warned!.
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0138 and EXPS-0139 for similar system
Top Triple clamp CNC black kit , Honda NSR250 MC18/MC21/MC28
€218.46
Top Triple Clamp Set, CNC Black, NSR250
CNC machined TYGA top triple clamp with detachable ignition switch/lock holder for your NSR250.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-1441Â
SKU: hon-10269 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopCowling left flat black, Honda MSX125 GROM
€23.35
Cowling left flat black, OEM Honda part
TYGA no: 77225-K26-900ZH
SKU: MSX-10320 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopFront fender RC211V, NC23 NC29 NC30
€71.75
ttaches to the original mounting points and can be used with all Tyga and Honda bodywork. Suitable for NC30, NC29 and NC23 models
Compatible Parts:
All Tyga Performance and Honda OEM panels.
TYGA no: BPFF-9002
SKU: hon-10072 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, CBR400RR NC23, CBR400RR NC29, Honda, Shop, VFR400RR NC30Battery Box Cover , Race, GRP, KTM RC390 WSS300
€77.43
Battery Box Cover, Race, GRP, KTM RC390 WSS300
Replacement Battery Box Cover. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPCX-7631UB (Carbon Unpolished)
BPCX-7631B (Carbon Clearcoated)