Carbon Console, (GRP) KTM RC125/200/250/390
€200.66
Console, (Carbon) KTM RC125/200/250/390
Replacement part to be used on TYGA upper cowling BPCU-7231(p)
TYGA no: BPCX-7531
SKU: ktm-10106 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390Rear shock holder, Honda VFR400 NC30
€18.50
Holder, Shock Reservoir, NC30
This stay mounts to the underside of the seat cowling sets BPFS-0148 and BPFS-0150. Supplied complete with clamps and mounting hardware.
Compatible Parts
TYGA seat cowling sets, BPFS-0148 and BPFS-0150
TYGA no: BPSY-0182
SKU: hon-10581 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, VFR400RR NC30Undertray seat, Ninja 400
€60.24
Undertray, Seat, (GRP) Ninja 400
Replacement undertray for TYGA Seat Cowling BPFT-7040(p)
TYGA no: BPFX-7040
SKU: kaw-10136 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Silencer stainless steel/ carbon cap, Yamaha R25 / R3
€282.59
Replacement Silencer, Stainless, Oval/Carbon End Cap, Yamaha R25/R3
Hand assembled with brushed stainless steel sleeve. Precision made CNC machined mount cap, with sleek carbon end cap.
This is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhause cover and fit the TYGA silencer.
This silencer looks great, significantly reduces weight without adding any noticeable volume.
(May not comply with noise regulations for some states and territories).
Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It does not include the special high temp resin exhaust guard BPCC-7033.If you require the exhaust guard to complete the transformation, please order set EXPS-0059 and save money over ordering individual parts.
TYGA no: EXSL-0052
SKU: yam-10047 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Shop, Yamaha, YZF-R25/R3Top triple clamp CNC black, KTM RC390, 2022-
€222.31
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1273
SKU: ktm-10208 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsVHM Cyl. Headset Husqvarna TC250 ’14
€327.95 €284.25
VHM Cyl. Headset Husqvarna TC250 ’14 -> (alg-10216)VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (21.80cc)Optional inserts:– blind– 20.60– 21.00– 21.45– 22.20This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33098.
SKU: alg-10216 Categories: ALL products, Husqvarna MX, Motocross, Shop, VHM productsFairingenset race style RVF, NC30
€667.52
This kit comprises of parts shown below. The fairing is exact as NC35* and the seat cowling is model specific to the NC30 but in the same shape as the NC35.
Ideal for race classes where retaining stock shape (or similar) is necessary to comply with rules. The panels are top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer cross weave mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
Please state if you would like a tinted screen or stock shape open lowers (BPFL-0003) and we will be happy to change to suit. The fairing will need a simple stay to locate front position.
Please note that the fairings only weigh approx. 1kg for each fairing panel and 2 kg for seat cowling. To ensure a safe delivery, the box they are sent in weighs 4 kg. You may want to consider two sets and save on shipping…
*Because the fairing is an exact copy fo the NC35 one, it is necessary to modify the NC30 front and upper stays to fit the positions on the NC35 panel.
TYGA no: BPFS-0042
SKU: hon-10075 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30