Carbon front fender, Honda CBR125/CBR150/CBR250 2011 – CBR300 2014
€183.85
This lightweight carbon version of the stock front fender will enhance the beauty of your CBR as well as reduce unsprung weight.
Suitable for the following models:
2011-2014 CBR125R
2011-2014 CBR150R
2011-2013 CBR250R
2014-2015 CBR300R
TYGA no: BPCF-7108
SKU: hon-10165 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR300R 2014-, Honda, ShopSeat Pad, NSR250V
€67.02
Kit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has a taillight for street use and special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0195 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPSP-0008
SKU: hon-11062 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Set exhaust, race system double maggot , KTM RC390 2014 – ’21
€866.32
.Set, Pipe, Race System, RC390, Stainless Moto MaggotUpdate your bike with this great TYGA performance, KTM power part!!.Set, Pipe, Race System, RC390, Stainless Moto MaggotModel 2017This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage. This system increases performance, saves weight and enhances the looks of the bike. The system is not supplied with decibel killers, and may not meet noise regulations in your area.CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.Please also see EXPS-0091 for similar system with oval silencersPlease refer to dynographA) All Standard.B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition mapC) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition mapVery useful gains especially in the mid range for both B) and C), for much stronger acceleration.The silencer was full bore.NEW! for the 2017 model we added the EXPT-0003:Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.Compatible with the following exhausts:Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0092
SKU: ktm-10092 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopSeat set race GP-T, Honda VFR400 NC30
€968.19
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC30. As well as bringing the NC30 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0165
SKU: hon-10631 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Complete bodykit T9, Honda CBR400RR
€1,319.77
This set of bodywork comprises all the bodywork parts including the passenger seat cover.
By ordering in one set you save money on the parts as well as save on shipping costs if you made the order in two or more separate shipments.
Please note parts are supplied unpainted and in white primer.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money.
Order with confidence.
Air duct GRP (pair), NC35
€131.81
These real carbon air ducts are a direct replacement for the cheap and nasty plastic ones the bike is supplied with. Fits in a few minutes and makes a dramatic improvement to the overall appearance of the bike.
TYGA no: BPFX-0018
SKU: hon-11417 Categories: ALL products, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopCarbon front brake reservoir stay, Honda VFR400 NC30
€36.86
Replacement for tired the stock front brake resevoir stay. This trick carbon stay can be used as a direct replacement for the heavy steel one on the NC30 VFR400R. It weighs about 25% of the original and as well as being stiff and strong, looks like it belongs on a GP bike.
TYGA no: BPCC-9017
SKU: hon-10418 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Upper stay RC30 style body kit, Honda VFR400 NC30
€81.81
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: TYLY-0300
SKU: hon-11424 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30