Carb Service Kit A, 47pieces, Kawasaki ZXR400
€90.08
Carb Service Kit A, 35 pieces, Kawasaki ZXR400
LiteTek Carburettor Seal Kit to suit: Kawasaki ZXR400
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-005 Float Bowl Ring, Material: Flourosilicone (OE part number: 92055-1426)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (OE part number: 92055-1002)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number: 92055-1003)
4x OR-032 Float Valve O-Ring, Material: Viton 70A (OE part number: 92055-1425)
4x OR-030 Outside Fuel O-Ring, Material Viton 70A (OE part number: 92055-1004)
8x OR-031 Centre Fuel & Outside Breather O-Ring, Material: Viton 70A (OE part number: 92055-1223)
4x CS-004 Choke Plunger Cap, Material: HNBR (OE part number: 16012-1052)
3x SC-008 Throttle Synch Screws, Material Stainless Steel (OE part number: N/A)
TYGA no: CK-Kawasaki-ZXR400
SKU: alg-10345 Categories: ALL products, Carburettor Service Kits,, Kawasaki, ZXR400LCarbon Meter Cover RGV250 VJ21
€31.39
Carbon Meter Cover RGV250 VJ21
Attractive carbon cover for Suzuki VJ21 RGV250 meter assembly.
For fitment, push it over the instruments on one side until the foam compresses a little, you will then notice that the cover will then slide freely in towards the centre of instrument a couple of mm, allowing you more slack so you can locate it on the opposite side of the instrument. You need to locate over both rev counter and temp gauge at the same time. Once in position and properly located, you will notice it will slide around somewhat so, pick out the backing tape and the adhesive will hold it into desired position on the foam instrument surround. Alternatively, remove backing before installation but be careful not to lose adhesion or let cover get stuck in wrong position before you are satisfied it is properly located.
Fits all VJ21 Models
TYGA no: BPCC-0055
SKU: suz-10135 Categories: ALL products, RGV250 VJ21, Shop, Suzuki, Various partsSeal, Headstock Lower
€25.62
Seal, Headstock Lower
TYGA no: 53214-371-010
SKU: hon-11142 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Fairing set race no air duct, Aprilia RS250
€663.95
This kit comprises of the parts shown below which are also available separately.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS250 MKII
Fairing set race no air duct, Aprilia RS250
This kit comprises all the parts shown on picture, which are also available separately.
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need them to fit the lower TYGA cowling.
TYGA no: BPFS-0101
SKU: apr-10033 Categories: ALL products, Aprilia, Bodywork, Bodywork and carbon, RS250, ShopUpper cowlinging T9,CBR400RR
€266.15
replacement upper cowling for BPFS-0075
Seat Cowling (GRP), NSR250 MC28, Stock Shape, Street, Painted Rothmans
€713.10
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFT-0007Painted
SKU: hon-10975 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersSide cover left flat black, Honda MSX125 GROM
€39.31
Side cover flat black, OEM Honda part
TYGA no: 83540-K26-900ZF
SKU: MSX-10322 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopRear axle Wheel, MSX/ Monkey
€20.41
Rear axle Wheel, MSX/ Monkey
TYGA no: 42301-K26-900
SKU: msx-10252 Categories: ALL products, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, OEM parts, OEM parts, Shop, Various parts, Various parts, Various parts