Stainless silencer 380mm
€231.41
Silencer, Stainless, Round, Four Stroke, 50.8mm., Assy
The Dimensions of this silencer are as follows:
I.D. 50.8mm (slip-on section) O.D. 4 inch. (diameter of stainless tube) L. 380mm Suitable for Ninja 250/300 and medium capacity four stroke motorcycles.
TYGA no: EXSL-0064
SKU: kaw-10066 Categories: 4 stroke exhaust sets, ALL products, Exhausts, SilencersUpper /mirror stay RC36-2, RC36-2 RC30 style
€212.39
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYLY-0305
SKU: hon-11457 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, StocklistCarbon belly pan, KTM Duke 125/200
€289.56
This lightweight carbon belly pan, complete with mesh weighs less than the stock one and adds style to your ride.
Please note, this product fits the 125 and 200 only. Due to the engine being larger, this product can not be installed on the 390. For 390 Duke, please see product BPCL-7031.
Update your bike with this great carbon product, direct replacement of the original part
TYGA no: BPCL-7131
SKU: ktm-10007 Categories: ALL products, Carbon, Duke 125/200 2012- 16, KTM, ShopCarbon Front fender, Aprilia RS125 (2007-2010)
€208.08
This is a stock shaped fender for the 2007-2011 Aprilia RS-125 complete with mounting holes pre drilled for ease of fitment.
Weighs a fraction of the stock one at approx. 240g.
Let your bike stand out from the crowd with this beautiful carbon product
TYGA no: BPCF-7107
SKU: apr-10009 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS125, ShopSubframe RC211V/T13, Honda NC30/NC35
€136.84
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: TYLY-0025
SKU: hon-10300 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Top end rebuild set Cylinder B, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘B’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston no mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001B
SKU: hon-10440 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopSuzuki RGV250 VJ22 Screen
€49.05
Suzuki RGV250 VJ22 Screen
This screen fits the original bodywork.
TYGA no: screenrgv
SKU: screenrgv Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, SuzukiThrottle Cable, Close, Ninja 250R/300R 2013 -18
€12.83
Throttle Cable, Close, Ninja 250R/300R 2013 -18
TYGA no: 54012-0578
SKU: kaw-10178 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, Shop