Top Triple clamp CNC black , Suzuki RGV 250
€218.46
CNC machined TYGA top triple clamp ( without detachable key holder for race use) for your RGV250 VJ22.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch holder can be ordered separately or together with this product as set TYLY-1046.
TYGA no: TYLY-1046(p)
SKU: suz-10056 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiHandle bar clamp left ” hinge type” black, KTM RC390 2014 -24
€106.61
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731L
SKU: ktm-10213 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsPro arm wheel spacer silver taper fit , Honda RC30 RC40 RC45 RS250 NX5
€24.56
Taper fit, rear Pro Arm rear wheel spacer. Machined from 7075 T6 aluminium. Light weight and attractive.
This spacer is a direct replacement for the rear wheel Pro Arm spacer on Honda Pro Arm models such as the RC30, RC40, RC45, RS250 NX5. Not suitable for the NC30, NC35, MC28 which uses a flat fitment on where it clamps to the wheel. (See TYLY-0096, TYLY-1096, TYLY-2096 and TYLY-3096)
TYGA no: TYLY-0196
SKU: hon-10526 Categories: ALL products, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various parts, VFR750R RC30Shroud right white, Honda MSX125 GROM
€32.45
Shroud right white, Honda MSX125GROM (msx-10017)
OEM Honda part
TYGA no: 83480-K26-900ZC
SKU: MSX-10018 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSilencer stainless oval left , KTM RC390
€301.69
Silencer, left, Stainless, Oval/Carbon End Cap, Spring Mount, KTM RC390 Serpent, No Fittings
If you need a DB-killer, you need to order that loose. please see product. msx-10283
TYGA no: EXSL-0057L
SKU: ktm-10098 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopSet pipe full system with stainless oval silencer, Honda Monkey 125 2018-
€384.49
Set, Pipe, Full Race System, High Level, Monkey 125, Stainless Oval/Carbon End Cap
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! ( DB Killer included)
All fitting hardware included.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125 compared to the red trace, which is after installing the TYGA Full System set (EXPS-0105)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0104 Moto Maggot High level System for Honda Monkey 125
EXPS-0106 Carbon Oval High level System for Honda Monkey 125
Genuine HRC mechanic Gloves, Size M
€95.39
TYGA Bike Dust Cover, Blue, Rothmans Honda
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: 82040-N99-000
SKU: hon-11305 Categories: ALL products, Bike covers, By model, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR 2017, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, Merchandise, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, NSR500V, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, RVF750 RC45, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2Tank shrouds (grp) black with duct and grill, Honda MSX125 GROM
€147.50 €104.00
Tank Shrouds, With Duct and Grille, (Pair), (GRP), MSX125 Grom, Asteroid Black. Painted to match your bike. Looks cool and makes your bike stand out from the crowd.
Pictures of the bike show carbon version of this product (BPCX-7828) installed.
TYGA no: BPFX-7828 B
SKU: MSX-10286 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various parts