Front fork adjuster 22mm
€32.91
ront fork Pre-load adjuster. suitable for adjuster with 22 mm oval type fitment, for example:
Aprilia RS-250 1998 2003
Aprilia RSV1000 ( with Showa forks) 2000 2006
Ducati 1098 (with Ohlins forks) 2008 2009
Ducati 916/996/998/999 1994 2007
Ducati 900SS/SP 1990 1998
Honda RVF400 1994 2000
Honda CBR 600 RR 2005 2006
Honda CBR 900 RR Fireblade 2000 2003
Honda CBR 1000 RR 2004 2007
Honda VTR 1000 SP1/2 2000 2007
Kawasaki ZXR-400 1990 2002
Kawasaki ZX 6R/RR 2005 2006
Kawasaki Z1000 2003 2006
Suzuki GSX-R 750
1992 2003
Suzuki RGV250 VJ22/VJ23
1990 1997
Suzuki GSX-R 750 2004 2005
Triumph Speed Triple 1050 2005 2010
TYGA no: TYLY-111 - TYLY-4111
SKU: alg-10152 - alg-10154 Categories: 848 / 1098 / 1198, ALL products, Aprilia, CBR1000 2004-7, CBR600RR 2005- 6, CBR600RR 2007- 16, CNC parts, Ducati, Honda, Kawasaki, RGV250 VJ22, RS250, RVF400RR NC35, Suzuki, Various parts, Various parts, Various parts, VTR1000Sp1SP2, ZXR250CTank cover set, CBR250RR MC22
€239.46
This product is a set of two tank covers which are designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example. They use the original mounting points front and rear.
We recommend using a smear of silicone sealant where the two halves meet and round the filler cap for a secure and watertight seal
Silencer GP-T, Aluminium 60mm, Two Stroke, Spring Mounted
€95.39
Silencer GP-T, Aluminium, Two Stroke, Spring Mounted, Assy
To complement our NX5 exhaust chambers, we wanted a silencer design which was both functional and classic. The result is this TYGA Performance GP-T style silencer. Available in three models, with carbon, carbon/Kevlar and aluminium outer tubes and with stainless end caps, it is mounted by two springs (included) for ease of installation and for looks. The silencer is strong and easily rebuildable, using rivets to assemble. Remember to order two silencers for every twin cylinder exhaust system! Also see EXSL-0069 and EXSL-0069.
Note, this silencer is only compatible with the NX5 RS250R exhaust system and cannot be mounted on other exhaust chambers in our product range.
TYGA no: EXSL-0070
SKU: hon-10903 Categories: ALL products, CNC parts, Exhaust, Honda, RS250R NF5 / NX5, ShopBracket front brake CNC black 84mm Brembo, Kawasaki Z125
€45.19
Bracket, Front Brake, 84mm Brembo Conversion, Black, Kawasaki Z125
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0134)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Carbon Meter Cover RGV250 VJ21
€31.39
Carbon Meter Cover RGV250 VJ21
Attractive carbon cover for Suzuki VJ21 RGV250 meter assembly.
For fitment, push it over the instruments on one side until the foam compresses a little, you will then notice that the cover will then slide freely in towards the centre of instrument a couple of mm, allowing you more slack so you can locate it on the opposite side of the instrument. You need to locate over both rev counter and temp gauge at the same time. Once in position and properly located, you will notice it will slide around somewhat so, pick out the backing tape and the adhesive will hold it into desired position on the foam instrument surround. Alternatively, remove backing before installation but be careful not to lose adhesion or let cover get stuck in wrong position before you are satisfied it is properly located.
Fits all VJ21 Models
TYGA no: BPCC-0055
SKU: suz-10135 Categories: ALL products, RGV250 VJ21, Shop, Suzuki, Various partsTop triple clamp CNC silver , Honda RVF400 -> CBR600 fork
€263.52
Top Triple Clamp, CNC silver, CBR600RR forks NC35/MC21/MC28 Conversion
CNC designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy TYLY-0041 for use on NSR conversion or TYLY-0042 for NC35 conversion.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-0059
SKU: hon-10552 Categories: ALL products, CNC parts, Honda, Shop, Stock list, all modelsAirbox carbon/kevlar, A kit, Honda RS250 NXA
€908.18
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Handlebar MiniRacerXtreme, Honda MSX125 GROM
€3.09
Handlebar, MiniRacerXtreme, MSX125 Grom
TYGA no: TYLY-1105HB
SKU: MSX-10254 Categories: ALL products, By model, Honda, MRX, MRX, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop