Belly pan (GRP) Yellow, Honda MSX125 GROM
€225.09 €158.00
Belly Pan, (GRP), MSX125, painted Y-217 Queen Bee Yellow to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with carbon, see BPCL-7228 shown on the bike in the photos.
Note: this product is painted to match Y-217 Queen Bee Yellow. Note we also have a similar product BPFL-7128 YM, (Y-216 Marigold Yellow) which matches the colour of the MSX125 Grom sold in some markets. Be sure to confirm the colour of your bike before ordering.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href=”{{media url=”wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf”}}” target=”_self”>Click here for PDF</a></p>
TYGA no: Â BPFL-7128 Y
SKU: MSX-10190 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopKit fairing set street GRP stock shape, Honda NSR250 MC21
€766.71
Kit, Fairing Set, Street, GRP, Stock Shape, NSR250 MC21
Complete set of stock shaped bodywork for the Honda NSR250 MC21
Consists of the following products (also available separately)
BPFU-0006 Upper Fairing
BPFL-9001 Lower Fairing
BPFT-9044 Seat Cowling
BPFF-0009 Front Fender
SCRE-0016 Clear Screen
TYGA no: BPFS-0204
SKU: hon-11221 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21Front fork adjuster 14mm
€32.91
Front fork Pre-load adjuster. suitable for adjuster with 14 mm oval type fitment, for example:
Make Model from year to year
Honda NSR250 1988 1997
Honda VFR400R 1989 1993
Honda CB 1300 2003 2009
Honda CB 1300 S 2005 2013
Honda CBR 600 F 2001 2007
Honda CBR 600 F Sport 2001 2002
Honda CBR 600 RR 2003 2004
Honda CBR 900 RR Fireblade 1992 1999
Honda Hornet 900 2002 2005
Honda VTR 1000 F Firestorm 1997 2006
Suzuki GSX-R 600 1997 2003
Triumph Daytona 1200 1993 1997
Triumph Daytona 900 1993 1996
Triumph Daytona 955i 1999 2006
Triumph Daytona T595 (955i) 1997 1998
Triumph Speed Triple 2003 2004
Triumph TT 600 2000 2003
TYGA no: TYLY-1110 - TYLY-4110
SKU: alg-10149 - alg-10151 Categories: ALL products, CBR600RR 2003- 4, CBR900RR 1992- 95, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Set pipe, Full race with round stainless silencer, Kawasaki ZXR250/300 2013 –
€548.01
.Set, Pipe, Full Race System, Ninja 250R/300R, Round Stainless SilencerThis full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.(May not comply with noise regulations for some states and territories and may exceed noise regulations for some ciircuits)This system is supplied with a stainless round silencer.<iframe width= 560 height= 315 src= https://www.youtube.com/embed/aFjJq-crAQ8 frameborder= 0 allowfullscreen></iframe>
Please see the two dyno graphs from Kawasaki Racing Australia who independently tested the TYGA system against the stock system and also against a well known competitor. The figures clearly show the advantages of installing a TYGA full race exhaust whether it be for street or for race use.Graph 1 shows 8.5% more power over stock just from installing the TYGA Full systemGraph 2 shows the peaks are very similar but look how the TYGA system has more power everywhere else, up to 10% more power in the important 9,000 to 10,000 range. The Leo Vince exhaust was mapped for 98 octane and the Tyga for 91 which should give an advantage to the Leo.
TYGA no: EXPS-0047
SKU: kaw-10030 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -, ShopCarbon rear hugger, Honda CBR500
€252.04
This lightweight carbon version of the stock hugger will enhance the beauty of your CBR as well as keep road dirt and water away from the rear shock and linkages. Modelled off the genuine plastic Honda aftermarket part but crafted in high quality carbon this products is suitable for the CBR500R, CB500X and CB500F.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
Fairing set race no air duct, Aprilia RS250
€663.95
This kit comprises of the parts shown below which are also available separately.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS250 MKII
Fairing set race no air duct, Aprilia RS250
This kit comprises all the parts shown on picture, which are also available separately.
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need them to fit the lower TYGA cowling.
TYGA no: BPFS-0101
SKU: apr-10033 Categories: ALL products, Aprilia, Bodywork, Bodywork and carbon, RS250, ShopRear wheel spacer kit aluminium, Suzuki RGV250
€76.31
Replace the heavy steel rear wheel spacer and wheel bearing distance spacer on the VJ22 with these lightweight 6061-T6 aluminium spacers. At 35% of the weight of standard they’re just what you need for easier wheelies!
TYGA no: TPER-0054
SKU: suz-10090 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiTank Filler Cap Breather Rubber, MC28
€11.45
Tank Filler Cap Breather Rubber, MC28
TYGA no: 17646-MN8-700
SKU: hon-11167 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28