Carbon front fender, Kawasaki ZX10R 2011-13
€212.41
High quality carbon products, perfect fitment and easy to install. Gives your bike that SBK look
Lightweight carbon fibre direct replacement for Kawasaki OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
Exhaust set slip on, oval stainless silencer with carbon cap, Honda MSX125 GROM
€394.13
Set, Pipe, Slip On, MSX125 2013-14, Stainless Oval/Carbon End Cap
Made in stainless steel with spring mounted hairline finish stainless silencer, and precision made CNC machined end cap. This system significantly saves weight and gives the best bang for the buck! This systme is supplied with a decibel killer which significantly reduces noise without adversely affecting performance and with installed, this is currently our quietest exhaust system available for the MSX125. ideal for owners not wishing to disturb the neighbours! (May not comply with noise regulations for some states and territories)
This system is supplied with a stainless steel sleeve silencer EXSL-1142
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is from installing the TYGA Slip On set (EXPS-0040).
A useful gain all through the range. Note, this test was done without the decibel killer installed.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0051
SKU: MSX-10278 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopHarness Extension, NC30 Meter, Honda VFR750R RC36-2
€36.02
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYWH-0006
SKU: hon-11537 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist2T blank plug, NSR250
€7.37
Replaces the 2T oil injector pump for pre mix use. Secure with liquid gasket such as Three Bond 1104. Must be used with TYLY-0015 Plug holder
Note for blocking the extra 2T feed on later model oil pumps.
On later engines (some MC21 and all MC28, there is an extra oil feed to the cases which can be observed when the oil pump is removed. HRC used to supply a little aluminium plug that you knocked into this extra hole to blank it off. However, that is discontinued so what to do depends on whether the conversion to pre-mix is permanent or not.
If permanant, then we recommend you make sure it’s all clean and degreased, and then fill the hole with epoxy steel. Allow it to cure and it’ll never leak.
If you’re not sure if you’ll ever go back to the oil pump, but would like the option, then we suggest covering the hole with a small thin disc of steel or plastic, and then using a RTV sealant to sort of glue that in place and also block it off. The RTV will stop any leaks, and the small disc will stop any RTV going down the hole. This is then soft enough to be cut away at a later date should you need to.
Compatible products:
TYLY-0015 Plug holder
TYGA no: TYLY-0012
SKU: hon-10388 Categories: ALL products, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsUpper Cowling (Street GRP), NC35, Endurance Style
€275.61
Upper Cowling (Street GRP), NC35, Endurance Style
This is a replacement panel for set BPFS-0153. We recommend you order the complete set which is supplied with all mounting hardware and complete ready to install. This product is intended as a replacement part in the event of an accident or for people wanting to use it for a model other than the NC35
This product does not include any mounting hardware or headlight covers.
TYGA no: BPFU-9110(p)
SKU: hon-10741 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Throttle Cable B, MC28
€32.37
Throttle Cable B, MC28
Similar quality (made in Japan) and replacement for Honda part number 17920-KV3-950
TYGA no: TYPP-0029
SKU: hon-10723 Categories: ALL products, By model, Honda, Honda OEM products, NSR250, NSR250 MC28, Various partsCarbon stone guard, Honda NSR250 MC21
€295.47
Stone Guard, Carbon/Kevlar, NSR250, MC21
NSR250 MC21 stone guard modelled on the HRC F3 component, this carbon and Kevlar TYGA version is both strong and lightweight and enhances your bike’s appearance. Can be used on street bikes using pod filters* as well as full on race bikes. Probably fits the MC28 too.
*Note that this product is designed for race bikes so be prepared to relocate components such as the air solenoids etc.
TYGA no: BPCX-9012
SKU: hon-10655 Categories: ALL products, Bodywork and carbon, Carbon, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopCover Seat CNT, Black, Ninja 250R/300R 2013 -18
€32.88
Cover Seat CNT, Black, Ninja 250R/300R 2013 -18
TYGA no: 53065-0062-H8
SKU: kaw-10174 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, Shop