Lower Triple Clamp, CNC Black, Honda VFR400R/NC30
€364.10
Lower Triple Clamp, CNC Black, Honda VFR400R NC30
CNC machined TYGA lower triple clamp for your NC30.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings.
This product is also sold as part of a set TYLY-1244, Triple Clamp Set, CNC Black, NC30.
Set full race system with carbon silencer, Honda MSX125 GROM
€509.76
Set, Pipe, Full Race System, MSX125 Grom, Carbon Oval/Carbon End Cap. First Generation.
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2100 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043), and Carbon Silencer (EXSL-0042).
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0042 Moto Maggot System
EXPS-0052 Stainless Oval Silencer System
EXPS-0066 Carbon Oval High level System for 2016 MSX125SF second generation Grom
Compatibility:
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0041
SKU: MSX-10132 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopUpper Cowling Right (GRP), NC30/35, T13 Style , Assy.
€110.40
This a replacement part for bodywork sets BPFS-0115 and BPFS-0119
TYGA no: BPFU-9218R
SKU: hon-10814 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, By model, Honda, RVF400RR NC35Lower Triple Clamp, CNC Black, RVF400 forks/NSR shaft
€367.66
CNC machined TYGA lower triple clamp for your NSR250 to take RVF400 NC35 forks.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set:
TYLY-1541Triple Clamp Set, CNC Black, NC35 Forks to fit MC21
TYLY-1741Triple Clamp Set, CNC Black, NC35 Forks to fit MC28
Carbon engine cover left, ninja 400 2018 –
€144.93
Engine Cover, (Carbon), Left, Ninja 400, 2018-
This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
See also BPCC-7140R and BPCC-7140 ( set with left and right cover)
TYGA no: BPCC-7140L
SKU: kaw-10130 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Seat pad large , flat
€46.69
Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!
Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.
Compatible Parts:
Tyga Tail cowling: BPFT-9030 BPFS-0102 and BPFS-0103
Seat set with carbon RC211V, NC35
€453.27
This is the seat cowling with carbon front section used in the NC35 RC211V style seat cowling kit BPFS-0035.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPCT-9018
SKU: hon-10150 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopMirror Stay Rubber, MC28
€10.71
Mirror Stay Rubber, MC28
TYGA no: 88112-KV3-830
SKU: hon-11134 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28