Front spacer wheel kit, fork conversion CBR600RR 05-06.
€36.64
Wheel, Front, Spacer Kit. ’05-’06 CBR600RR fork conversion.
These spacers are designed to allow the standard NSR250, NC30/35 front wheel to be used together with the ’05-’06 model CBR600RR forks when used with our CBR600RR triple clamp conversion.
Note that the upper/lower triple clamp bore dimensions are 48mm – 53mm.
The standard ’05-’06 axle shaft is too large a diameter to fit the NSR/NC wheel, so these spacer bushes are used to allow the use of the smaller axle shaft. The standard NSR250/NC30 shaft is a little too short, so we recommend using an RVF400 axle.
The NSR/NC disc mounting face is 100mm wide. The disc pitch, centerline to centerline of the rotors should be 138mm, and the discs 310mm in diameter.
RVF750R RC45 or NR750 discs can be used
TYGA no: TPER-0065
SKU: hon-10962 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsCarbon meter cover black, MC21/MC22/NC35/NC29/SC28
€40.76
Carbon Meter Cover MC21, MC22, NC35, NC29, SC28
Attractive carbon cover for MC21 meter assembly.
For fitment, simply remove adhesive backing and pop it on over the three foam retaining buttons.
Fits?Honda models as follows: CBR900RRN/RRP/RRR, RVF400 NC35, CBR400 NC29, CBR250 MC22.
TYGA no: BPCC-0004
SKU: hon-10377 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR125 JC22 1994 - 2003, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsWater Hose, Fr. Head Out, MC28
€18.13
Water Hose, Fr. Head Out, MC28
TYGA no: 19508-KV3-830
SKU: hon-11162 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Clutch plate A, Honda NSR250 MC21/MC28
€43.25
MC28 SE/SP Clutch plate A, use as 22201-KV3-780
TYGA no: 22201-KV3-980
SKU: hon-10575 Categories: ALL products, Honda, Honda OEM products, NSR250, NSR250 MC21, NSR250 MC28Carbon front fender, Kawasaki ZXR250 2008 –
€218.25
Great front fender for ZXR250, easy to instal and looks cool
Carbon direct replacement for OEM Kawasaki item.
Weighs a fraction of the original fender and sets your bike out from the crowd. Pre drilled for easy fitting.
TYGA no: BPCF-7016
SKU: kaw-10014 Categories: ALL products, Carbon, Kawasaki, Ninja 250R 2008- 12, ShopHonda VFR400 NC30 screen
€49.05
Honda VFR400 NC30 screen
This screen fits the original bodywork.
TYGA no: screenvfr400
SKU: hon-10319 - Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Triple clamp set CNC black, Honda CBR250 MC22 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 48 mm / 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks on the lower clamp, please change options below)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-1012 when installing this triple clamp set for best clearance issue with the CBR250RR clocks and fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1230
SKU: hon-11230 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersFront cowling race RCV211, NC30 NC35 NC29
€152.38
This is a replacement part for bodywork set BPFS-0012, BPFS-0014 and BPFS-0020
TYGA no: BPFU-9120F.
SKU: hon-10093 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, CBR400RR NC29, Honda, RVF400RR NC35, Shop, VFR400RR NC30