Fairing set race T9, Honda CBR400 NC23
€597.76
CBR400 NC23 race fairing.
This kit is supplied with all additional fasteners required to mount it to a stock NC23. It fits to the original meter and supplied with a mirror stay. It uses the Honda mounting points and fasteners for mirrors. Where it mounts to the lower cowling and frame, it uses the original Honda bolts and clips (not supplied)
Please note parts are supplied unpainted and in white primer.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money.
Order with confidence.
Bracket rear brake CNC silver 84mm Brembo, Suzuki RGV250 VJ22
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, VJ22 and VJ23.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1090)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-0090
SKU: suz-10082 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiHandle bar set racing “hinge type” black, KTM RC125/RC200/RC390 2022-
€247.11
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1531
SKU: ktm-10215 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsSection header stainless WSS300 race system, KTM RC390
€226.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0077
SKU: ktm-10135 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsClutch Cable, MC28
€44.34
Clutch Cable, MC28
This clutch cable is an alternative for the Honda OE part 22870-KV3-981.
Carbon exhaust guard, Honda NR750
€130.42
Exhaust Guard, Carbon, Honda NR750
This lightweight carbon exhaust guard replaces the heavy and ugly steel stock one and is molded the same shape for easy installation. This product is made using specially formulated high temperature resin and has a backing layer of carbon/Kevlar. Note this should be installed with mat, heat guard 50608-MT7-000 (NOT INCLUDED) or similar to prevent excessive heat reaching the guard.
Please note the photos of the heat mat 50608-MT7-000 are for reference and is not included with this product.
HRC sticker 85mm (type 2)
€2.88
This product is a genuine OEM Honda HRC sticker. Very high quality. Excellent inks and printing with strong adhesive so no need to clearcoat over. Size is approx. 110 mm. X 40 mm.
TYGA no: 86833-K33-T70
SKU: alg-10407 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR 2017, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Hawk/Bros 400/650, Honda, Merchandise, MSX125 2021-, MSX125 GROM, MSX125SF 2016 -2020, New OEM Honda parts, NR750, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, NSR500V, NSR500V NX6, RC36-2 -> RC30 replica products, RS250R NF5 / NX5, RVF400RR NC35, RVF750 RC45, Shop, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2