VHM cylinder head (2 pieces), RGV250 / RS250
€544.90 €453.72
VHM cylinder head (2 pieces), RGV250 / RS250 (alg-10092)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website, for use on the Suzuki RGV250, and also Aprilia RS250.
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design. Combustion chambers are available in different volumes.
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
Other options:
11.80
12.00 (standard)
12.20
12.40
12.60
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33102 + AE32149 ABCDEF
SKU: alg-10092 Categories: ALL products, Aprilia, High performance, High performance, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various parts, VHM productsClutch Spring Dry, MC28 SE/SP
€4.91
Clutch Spring Dry, MC28 SE/SP
TYGA no: 22401-KV3-840
SKU: hon-11149 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Fairing set race RC211V, NC35 kit
€813.47
Fairing set race RCV211, NC35 kit
This set of bodywork comprises of the parts shown in the picture which are also available separately
*A clear screen is provided.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0014
SKU: hon-10128 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopStud, Exhaust #2 8×22, MC28
€3.45
Stud, Exhaust #2 8×22, MC28
TYGA no: 90035-KV3-950
SKU: hon-11131 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Big bore kit 300cc wiseco VHM, NSR250 MC18/MC21/MC28
€2,842.71
Big Bore Kit, NSR300, Wiseco, VHM *
This 300cc Big Bore Kit is identical to the TPER-0007 300cc Big Bore Kit, but the standard 300cc heads and pistons are replaced with high performance options.
In this case we have forged Wiseco pistons that are lighter and stronger than stock, and also changable insert VHM cylinder heads, which have been specifically developed by TYGA and VHM for use with the TYGA 300cc Big Bore Kit.
See below for performance details for TPER-0007.
Bore & Stroke is 59mm x 54.5mm giving a total displacement of 298cc.
Parts included in the NSR300 kit.
Cylinder x 2 (includes head studs, RC valve, pulley & nut and washers)
Rear Head x 1
Front Head x 1
Piston x 2
Ring set x 2
Piston Pin x 2
Piston Clip x 4
S/E Bearing x 2
Head gasket x 2
Cylinder gasket x 2
RC Valve cables x 4
Water hose x 1
Exhaust Manifold x 2 (to fit TYGA pipes)
Other information:
There is no problem about the RC valves hitting the piston due to thin cylinder wall thickness. This is not an issue on our kit as it’s using different
cylinders, not modified NSR250. They are genuine OEM Honda cylinders, made and plated in Japan to their typical high quality.
The RC valves are easier to adjust than ever on the 300 kit, as there’s only one adjuster screw to play with, and each cylinder marked at the correct ‘fully open’ position for simple setting.
Exact Jetting requirements for your area and application cannot be provided due to differing atmospheric conditions around the world. However, following are some base settings to work from:
MC21 Std bottom end, Wire splice, TYGA Pipes, Airbox lid mod with filter.
Temp: 29 C
Press: 1015mb
Hum: 65%
Alt: 30m
MJ – #182/#185
JN – Std./Std.
SJ – #38/#38
AS – 1.5 turns out
PwrJ – Std./Std.
Tip: Cooler temps, higher pressure and/or lower humidity require richer jetting. High altitude requires leaner settings. Starting off with rich settings will in the worse case foul a plug. Too lean a setting may destroy the engine.
This jet set-up is for guidance only. TYGA Performance cannot be held responsible for any engine damage incurred due to incorrect settings.
At present, this kit is available by special order. Each kit takes approx. four weeks to prepare.
TYGA no: TPER-1007
SKU: hon-10391 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopCarbon Side cowling A left, KTM RC125/RC200/RC390
€300.99
Side Cowling A, Left, Race (Carbon), KTM RC125/200/390
This lightweight carbon side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7331L TYGA Performance Side Cowling B, Left, Race (GRP), KTM RC125/200/390.
or
BPCX-7331L TYGA Performance Side Cowling B, Left, Race (Carbon), KTM RC125/200/390.
Our fairing has the same shape as the original KTM side cowlings, but we have made some updates on the product which makes it stronger and easier to instal.
The TYGA side cowling work together as a set, the original KTM fairing won’t fit the TYGA and vice versa.
When you want to order make sure you order A B.
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: BPCX-7231L
SKU: ktm-10053 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopCarbon heel guard suitable Left and right, Yamaha R25/R3
€40.16
Replacement left heel guard for Tyga step kits, see model below. Suitable for left and right side.
STAA-0025
TYGA no: BPCC-0019Â
SKU: yam-10055 Categories: ALL products, CNC parts, Stock list, all models, Yamaha, YZF-R25/R3Carbon seat cowling set street sup style , KTM RC125/RC200/RC390
€541.38
Seat Cowling Set, Street, (Carbon), Cup Style, KTM RC390
This lightweight seat cowling is modeled on the KTM RC390 Cup shape, but has been modified to take the stock KTM rear light cluster and registration/license plate holder. Being made from carbon it is lighter than stock and is supplied finished in high gloss UV resistant clear coat so no need to paint.
This product is supplied with all mounting hardware and consists of the separate components shown below which are available separately.
We aim to have this product in stock at all times for immediate shipping. No waiting or worrying about if the parts will arrive in time for your next race.*
Please note, this product fits the 125, 200 and 390 RC models and is for street use.
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: BPFS-0142
SKU: ktm-10064 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, Shop