Registration/License Plate Holder, (Carbon), T13 Assy.
€136.75
This product is made using carbon fiber and holds the registration/license plate for use with our T13 seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement. We also offer the same product but using only GRP, see BPFX-9118
This product attches by means of two bolts on an angled back flat plate and could be adpted to be used with other models with a flat undersurface.
TYGA no: BPCX-9118
SKU: hon-10823 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Bike cover Honda
€58.87
Genuine Honda Bike Cover, fitted with elastic for secure installation. I supplied with its own storage pouch.
TYGA no: 08P34-KPP-700
SKU: hon-10474 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, PCX150, RS250R NF5 / NX5, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Exhaust Chamber, Right, Side By Side Type, Stainless Steel, Aprilia RS-250
€281.46
Bare replacement right side chamber for EXCS-0007
Carbon airduct trim cover (pair), Honda MSX125SF GROM
€57.13
Air Duct Trim Covers, Pair (Carbon) MSX125SF
Carbon air duct trim to decorate your MSX125 Grom. Precision molded, these fit over the stock plastic stock items and transforms the appearance of your bike. Install with double sided tape provided or with silicone sealant for a really permanent installation.
TYGA no: BPCC-7328
SKU: MSX-10393 Categories: ALL products, Bodywork and carbon, Carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020Seat Pad (reproduction), HRC RS125 NX4
€22.73
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPSP-0009
SKU: hon-11421 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR500V NX6, RS250R NF5 / NX5, RS250R NXA, Various partsSet pipe full system no silencer (maggot system) , Honda Monkey 125 2018-
€166.16
Set, Full System, Monkey 125 (No Silencer)
Can be used with TYGA Moto Maggot Silencer EXSL-8213(p)
See also EXPS-0104 For complete set
Belly pan (GRP) RED, Honda MSX125 GROM
€225.09 €158.00
Belly Pan, (GRP), MSX125, painted valentine red to match your bike. Bling up your grom with this cool component.
Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.
High quality mounting hardware provided and easy to install.
We also offer the same product with carbon, see BPCL-7228 shown in photos of belly pan fitted to bike.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<p><a href=”{{media url=”wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf”}}” target=”_self”>Click here for PDF</a></p>
TYGA no: Â BPFL-7128 R
SKU: MSX-10187 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopSub-frame, Aprilia RS250 (Tyga)
€156.77
his subframe is a replacement for the stock Aprilia item and to be used in our TYGA seat cowling kits BPFS-0102 and BPFS-0103 etc. and bolts up to the 1998-2006 frame without need for modifying any components. It will not fit the stock Aprilia seat cowling.
The subframe is supplied with all the fasteners needed to mount the various components that are housed under the seat cowling and incorporates a battery tray. This product is made in steel but is light without compromising strength. Not to be used on a motorcycle carrying a passenger and rider.
TYGA no: TYLY-0065
SKU: apr-10038 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, Shop