Front spacer wheel kit, fork conversion CBR600RR 05-06.
€36.64
Wheel, Front, Spacer Kit. ’05-’06 CBR600RR fork conversion.
These spacers are designed to allow the standard NSR250, NC30/35 front wheel to be used together with the ’05-’06 model CBR600RR forks when used with our CBR600RR triple clamp conversion.
Note that the upper/lower triple clamp bore dimensions are 48mm – 53mm.
The standard ’05-’06 axle shaft is too large a diameter to fit the NSR/NC wheel, so these spacer bushes are used to allow the use of the smaller axle shaft. The standard NSR250/NC30 shaft is a little too short, so we recommend using an RVF400 axle.
The NSR/NC disc mounting face is 100mm wide. The disc pitch, centerline to centerline of the rotors should be 138mm, and the discs 310mm in diameter.
RVF750R RC45 or NR750 discs can be used
TYGA no: TPER-0065
SKU: hon-10962 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsSeal Thermostat Housing, MC18~28
€11.04
Seal Thermostat Housing, MC18~28
TYGA no: 19305-KV3-010
SKU: hon-11078 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Silencer stainless round, WSS300 (street) system, KTM RC390
€406.03
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0074
SKU: ktm-10149 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsHEL rear brake line Brembo 84mm, Honda MSX125 GROM
€76.14
Kit includes:
1x HEL Brake Line
4x Sealing Washer
1x M10x1.25 Banjo Bolt
1x M10x1.00 Banjo Bolt
20 degree side bend banjo goes to master cylinder. 20 degree side bend banjo goes to caliper.
See pictures for correct fitting.
Route the hose through the standard brake hose retaining clips
Brembo caliper uses M10x1.00 banjo bolt. Not the same as standard Honda bolt.
For ease of bleeding, the caliper should be removed and orientated so that the bleed nipple is at the highest point.
TYGA no: BLSR-0010Â
SKU: MSX-10131 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsRacing stepkit adjustable (street), KTM RC125/200/390
€423.04
Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine-made step kits are made from top quality aircraft grade aluminium. Complete with carbon heelguard on left and right hanger.
Race shift possible by reversing the gear change arm. No other modification necessary other than adjustment of the link rod.
Peg position is 25/40mm. up and 15/30mm. back*.
Brake light is operated by standard pressure switch.
Provision for the side stand is provided.
Fitting the TYGA Step Kit for the KTM RC390 requires that the swingarm axle be removed from the machine, which can render the vehicle unstable. Having an assistant can be very useful during removal and fitting of the axle.
* Peg position can be adjusted to four positions by 2x M8 bolts attaching the hanger plate to the main plate. After a position change, adjustment of the gear change arm and link rod length will be necessary. For your safety. please ensure all fasteners are tight before use, and we recommend the use of thread locking agent (such as Loctite 242) on the 2x M8 bolts.
Reverse schifting is possible with this race step kit.
Update your bike with this great TYGA performance, KTM power part!!
<a href= {{media url= wysiwyg/06-ktm-rc-series-sk-online-9885a093.pdf }} target= _self >Click here for fitting instructions</a>
TYGA no: STAA-0024
SKU: ktm-10038 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, ShopSilencer, Stainless Moto Maggot, 50.8 mm., CBR250R, Assy.
€214.36
Same as EXSL-3013(p) but with mounting springs and spring hooks to weld on an existing system. Designed to be used with Tyga Performance exhaust systems and other custom exhausts. Not suitable for stock CBR250R system
Carbon meter cover black, MC21/MC22/NC35/NC29/SC28
€40.76
Carbon Meter Cover MC21, MC22, NC35, NC29, SC28
Attractive carbon cover for MC21 meter assembly.
For fitment, simply remove adhesive backing and pop it on over the three foam retaining buttons.
Fits?Honda models as follows: CBR900RRN/RRP/RRR, RVF400 NC35, CBR400 NC29, CBR250 MC22.
TYGA no: BPCC-0004
SKU: hon-10377 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR125 JC22 1994 - 2003, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsBrake reservoir cap front silver , Honda MSX125 GROM
€24.38
Brake Reservoir Cap, Front, CNC, Grey, genuine Honda part.
TYGA no: APK2645513TA
SKU: MSX-10036 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various parts