Clutch cable dizzy club , Honda NSR250 MC18 / MC21
€41.42
lutch Cable, MC21, Dizzy Club. This attractive red clutch cable is an alternative for the Honda OE part 22870-KV3-680. It is ssuitable for MC18 and MC21 models
TYGA no: 101-92-1651-00
SKU: hon-10510 Categories: ALL products, Honda, NSR250 MC18, NSR250 MC21, Shop, Universal parts, Various parts, Various partsSet, Pipe, Full Race System, High Level, MSX125 2021-, Stainless Oval/Carbon End Cap
€529.05
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Fuel Tank, GRP Unpainted, RC36-2 RC30 style
€1,156.20
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFG-0009
SKU: hon-11459 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistO Ring, Water Splitter, MC28
€4.72
O Ring, Water Splitter, MC28
TYGA no: 91301-GK1-003
SKU: hon-11106 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Set pipe Full race system WSS300 (race), KTM RC390
€1,155.39
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0112
SKU: ktm-10147 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsTyga Step Kit Replacement Gear Shaft Clamp, NSR250
€9.34
Tyga Step Kit Replacement Gear Shaft Clamp, NSR250
Tail light LED RC211V
€59.92
This tail light is wired to fit the stock NC30/35 wiring harness for tail light and brake light functions. It also has bullet connectors for connecting to the registration/license plate holder light. It is very light and is held in place by two sided adhesive tape. To be used on our RC211V and T13 style seat cowlings but could be adapted to fit any other model which has a near vertical surface to apply it to.
TYGA no: BPLT-0013
SKU: alg-10068 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Clamp/manifold, NSR150/250
€24.06
This is a replacement part for Tyga chambers. When ordering chambers, this item is included in the price and you do not need to order this parts separately.
Compatible with the following TYGA systems:
EXCS-0002
EXCS-0003
EXCS-0005
EXCS-0006
TYGA no: EXMC-0001
SKU: hon-10379 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop