Upper cowling race ,KTM RC125/RC200/RC390
€150.56
Upper Cowling, Race (GRP), KTM RC125/200/390
This lightweight GRP upper cowling replaces both the heavy and brittle clear front cowling and the black plastic part underneath to save weight, add strength and make for easy assembly. A must for anyone racing the RC390!
Note this product requires windscreen model SCRE-0163 or SCRE-0164 to complete the race conversion
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFU-7131
SKU: ktm-10042 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, ShopBoyesen Dual reeds, Aprilia RS125
€48.76 €46.52
Boyesen Dual reeds, Apriia RS125
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.
Boyesen dual-stage power reeds produce a better throttle response right off idle and through the mid-range when compared to the traditional Power Reed setup.
1 engine = 1 set
TYGA no: boyesen2
SKU: alg-10375 Categories: ALL products, Aprilia, Exhausts, High performance, RS125, Shop, Various partsCarbon engine cover left, Honda CBR1000 2008 -15
€102.42
Engine Cover, Left, (Carbon) 2008-15 CBR1000RR
This lightweight carbon cover fits over the engine case and has kevlar reinforcing, designed to protect your engine against scratches and damage in the event of an accident.
Beautiful, perfect fitment and give your bike that HRC look.
TYGA no: BPCC-8101L
SKU: hon-10446 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, ShopDB-killer for stainless exhaust 2 inch
€28.57
Decibel Killer, Silencer, Stainless, 2 Inch
This decibel killer is designed to reduce the noise from TYGA exhausts with 2 inch tail pipes. Suitable for the following models:
EXSL-0017 SUS Oval
EXSL-0040 Silencer, Aluminium, Round, 2 x 380 mm.
EXSL-0047 Silencer, Aluminium, Round, 2 x 450 mm.
It will also physically fit the following silencers, but it should not be used with any carbon silencer due to extreme heat buildup. If you like the designs below and would like the DB killer then please request that the silencer be made with stainless steel sleeve instead of carbon. We will advise on price (Stainles version of silencers below inclusive of db killer included will be less expensive than the carbon version excluding the db killer)
EXSL-0012
EXSL-0016
EXSL-0022
EXSL-0023
TYGA no: EXDK-0003
SKU: alg-10226 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Clutch Pressure Plate, MC28 SP
€59.69
Clutch Pressure Plate, MC28 SP
TYGA no: 22351-KV3-780
SKU: hon-11151 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Cowling, Upper, Black, Ninja 250R 2008 -12
€187.99
Cowling, Upper, Black, Ninja 250R 2008 -12
TYGA no: 55028-0153-H8
SKU: kaw-10194 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopFront fender (GRP), Honda CBR600 2007/12
€82.80
Front Fender (GRP), 2007-16 CBR600RR
GRP direct replacement for OEM Honda item. Pre drilled for easy fitting.
TYGA no: BPFF-7206
SKU: hon-10495 Categories: ALL products, By model, CBR600RR 2007- 16, Honda, ShopSet pipe Full race system WSS300 (street), KTM RC390
€1,155.39
Set, Pipe, Full Race System, WSS300, (Street) KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0111
SKU: ktm-10146 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all models