Licenseplate holder Tyga RGV/RC211V
€55.70
This product holds the registration/license plate for use with our RC211V and RGV seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement.
This product attaches by means of two M5 bolts on an angled back flat plate and could be adapted to be used with other models with a flat undersurface.
TYGA no: BPCX-9007
SKU: alg-10033 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, By model, Honda, RGV250 VJ22, RVF400RR NC35, Shop, Suzuki, VFR400RR NC30Carbon fairing set street GP-T, Honda NSR250 MC21/MC28
€1,780.94
Kit, Fairing Set, Carbon, (Street), NSR250 GP-T
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NSR250. As well as bringing the NSR250 up to date, it also offers huge weight saving and easy fitment and removal. Similar to a GP bike, the fairing is held on by R clips and nylon bungs for quick release. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this fairing BPFS-0138 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0137
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0138
SKU: hon-10530 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarburettor Seal/Gasket Kit, MC21
€69.55
Carburettor Seal/Gasket Kit, MC21
Carburettor Seal/Gasket Kit, MC18, MC21
MC18/MC21 Carburettor Seal/Gasket kit.
1 Kit is for 1 Carburettor, so 2 kits needed for 1 bike
TYGA no: 16010-KM9-505
SKU: hon-11170 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC21Seal Gap, Universal (airbox) 50cm
€4.33
Exhaust Valve Bottle Holder, RGV250 VJ21/VJ22
In house designed and 3D printed with excellent strength and durability this exhaust valve bottle holder is the perfect solution to securely fit the exhaust valve bottle to the frame.
For exhaust valve bottle see BPAC-0011
TYGA no: BPAC-0013
SKU: alg-10405 Categories: ALL products, Aprilia, Bodywork and carbon, Honda, NSR125 JC22 1994 - 2003, NSR250, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS250, RSV125, RVF400RR NC35, Shop, Suzuki, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93Sub-frame aluminium, Suzuki RGV250 VJ21
€177.07
Subframe, Aluminium, RGV250 VJ21, Assy
This lightweight aluminium subframe replaces the heavy steel scaffolding that Suzuki saw fit to inflict on the VJ21 and is idea for a race or modified street bike. The VJ21 is a light and agile bike and it is a pity that it is encumbered with all this weight at the rear of the bike which becomes redundant once you convert to single seat. All that is really needed is a lightweight subframe to support:
The rear fender
Taillight
Attachment for the radiator surge tank.*
* The surge tank is now accessed from the inside without the need to remove the race seat cowling should any top up be required. Alternatively, an aftermarket surge tank such as this can be installed (BPAC-1002)
With a single seat cowling, access to the autolube reservoir is hindered so we simplified the subframe so:
No passenger seat support area
No passenger pegs and mounting hangers
No autolube reservoir and mounting hardware.
No exhaust silencer mounts
Note that we are in the process of making an alternative suitable autolube reservoir kit and exhaust silencer mounting stays.
This product is made in-house in TYGA and all hand fabricated and precision welded for a race inspired and lightweight product, finished in high quality satin black powercoating and Includes all mounting hardware to mount subframe and undertray. The difference in weight is 0.54kg compared to 2.1kg for the stock one, so a whopping 1.56kg lighter!
Optional products which can be used in combination with this subframe
BPSY-0276 Mudflap
TYLY-0251 Coolant Reservoir Fitting Kit
TYGA no: TYLY-0248
SKU: suz-10151 Categories: ALL products, Bodywork and carbon, RGV250 VJ21, Shop, Suzuki, Various partsUpper cowling front race, Ninja 400
€154.72
Upper Cowling, Front (Race GRP), Ninja 400
Replacement Upper Cowling for TYGA Race Bodywork kit BPFS-0175
TYGA no: BPFU-7040
SKU: kaw-10140 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Side fairing right RC211V, NC30 NC35
€110.40
This a replacement part for bodywork sets BPFS-0012* , BPFS-0013, BPFS-0014, BPFS-0032, BPFS-0033. This part renamed from BPFU-9118R
*fits later model BPFS-0012, earlier BPFS uses another parts. If in doubt email us first before ordering
TYGA no: BPFU-9120R
SKU: hon-10095 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Decal set, type 4 Blue Metallic scheme, Honda MSX125 GROM
€46.17
Decal Set, MSX125, Type 4, 2014 Blue Metallic Scheme. This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026U
SKU: MSX-10230 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop