Carbon seat set race, Aprilia RS250
€1,059.04
Due to popular demand, our GP seat cowling kit is now available in carbon race version. These panels are both lighter and stronger than GRP. Finshed in three layers of tough clear coat to protect against UV light, they are ready to use and don’t require painting.* This kit comprises of the parts shown below which are also available separately.
*Please note, does not include front fairing kit which can be ordered, Graphics shown in photos are not included.
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS-250
If you have left and right exiting chambers (side by side) you will need to add 1 X exhaust stay to your order (Only one supplied in kit for twin right exiting chambers)
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need this fot the lower TYGA cowling.
TYGA no: BPFS-0168
SKU: apr-10087 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopPiston B, MC21/28
€123.97
Piston B, MC21/28
TYGA no: 13102-KV3-830
SKU: hon-11181 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Lower Triple Clamp, CNC Black, RVF400 forks/NSR shaft
€367.66
CNC machined TYGA lower triple clamp for your NSR250 to take RVF400 NC35 forks.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set:
TYLY-1541Triple Clamp Set, CNC Black, NC35 Forks to fit MC21
TYLY-1741Triple Clamp Set, CNC Black, NC35 Forks to fit MC28
Carbon chain guard, KTM RC125/RC200/RC390 2022-
€141.35
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCX-7131B
SKU: ktm-10207 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsFitting kit for Belly pan, KTM RC
€30.90
Fitting kit for Belly pan
This mounting kit is for our belly pan:
BPFL-7231
BPCL-7231
BPFL-7331
BPCL-7331
TYGA no: TYBP-?
SKU: ktm-10171 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, KTM, RC 390Carbon fork guards (pair), Honda Monkey 125 2018-
€162.86
Carbon fork guards (pair), Honda Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCC-7042
SKU: msx-10432 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopCarbon radiator bracket MK1, Aprilia RS250
€61.22
Carbon radiator bracket MK1, Aprilia RS250 (apr-10080)
Nice carbon part, better looks for your bike and good replacement for that heavy steel one
TYGA no: 004703KT/P
SKU: apr-10080 Categories: ALL products, Aprilia, Bodywork and carbon, By model, Carbon, RS250, ShopSeat Cowling (GRP), NSR250 MC28, Stock Shape, Street, Painted Rothmans
€713.10
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFT-0007Painted
SKU: hon-10975 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, Silencers