Upper Cowling Left (GRP), NC30/35, T13 Style , Assy.
€110.40
This a replacement part for bodywork sets BPFS-0115 and BPFU-00119
TYGA no: BPFU-9218L
SKU: hon-10813 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Carbon heel guard right,
€32.04
Replacement left heel guard for Tyga step kits, see model below. TYGA design, but will also fit standard Aprilia RS-250 hanger.
STAA-0006
STAA-0024
STAA-0124
TYGA no: BPCC-9008
SKU: apr-10028 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RS250, Shop, Various partsFuel Tap / Pet Cock, MC21
€103.58
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: 16950-KV3-682
SKU: hon-11273 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250 MC21, ShopBrake Reservoir Cap, Front, Ninja 250R 2008 -12
€27.76
Brake Reservoir Cap, Front, Ninja 250R 2008 -12
TYGA no: 43026-1074
SKU: kaw-10204 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopTop Triple clamp CNC silver , NC30
€169.92
CNC machined TYGA top triple clamp with detachable key holder for your VFR400 NC30.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
This product can be bought as a set TYLY-1044 with detachable ignition switch holder
TYGA no: TYLY-0044(p)
SKU: hon-10115 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Set upper/meter stay Race, Kawasaki Ninja 400 2018-
€292.88
Set, Upper/Meter Stay, Race, Ninja 400
This lightweight all aluminium upper cowling/meter stay replaces the big and complicated heavy steel one supplied with the bike and weighs a fraction of the original.
It is designed to be strong but minimal and supports both the fairing and instrument securely. It consists of a CNC machined aluminium clamp around the headstock and a lightweight aluminium fabricated stay which has been powdercoated for a durable finish.
It is simple and easy to install and in the event of an accident, it is easy to replace or repair. The instruments are mounted using the original stock mounts and it has a tab for holding the tipover sensor, also includes a stay to relocate the regulator.
Please note this is for circuit use only and can be installed with TYGA Performance ( BPFS-0175) or other race bodywork.
TYGA no: TYLY-0216
SKU: kaw-10153 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Speedometer pick up layshaft , NC23, NC29, NC30, NC35
€17.20
Speedometer Pick Up, Layshaft
TYGA no: 44808-MR7-013
SKU: hon-10507 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, Honda, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, VFR400RR NC30Kit, Fairing Set (GRP), Honda NX5 1993 RS250R (early model style)
€870.62
Kit, Fairing Set (GRP), Honda NX5 RS250R (1993 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Lower Cowling, (GRP) NX5 RS250R (1993 Style) (BPFL-9136)
The lower fairing is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9236
Seat Cowling Race (GRP) NX5 RS250R (1993 Style) (BPFT-9236)
The seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
TYGA no: BPFS-0180
SKU: hon-10940 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop