TYGA / Kitaco Power up kit carbon , Honda MSX125 GROM
€750.67 €675.60
TYGA/KITACO Power Up Kit, Carbon Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0041 Set, Pipe, Full Race System, MSX125 Grom, Carbon Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0095
SKU: MSX-10305 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon end cap exhaust, Honda Monkey 125 2018
€158.99
Carbon end cap exhaust, Honda Monkey 125 2018
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7242
SKU: msx-10441 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopSet, pipe full race system round stainless silencer LH exit, VFR750F gen 4, 94-97
€1,107.23
Set, pipe full race system round stainless silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0128
SKU: hon-11021 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Cowling, Side, RH, Ebony, Ninja 250R 2008 -12
€259.23
Cowling, Side, RH, Ebony, Ninja 250R 2008 -12
TYGA no: 55028-0272-H8
SKU: kaw-10198 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopFairingstay RC211V, NC35
€85.28
Lightweight GP style upper stay to use on the RC211V style and T13 fairings
TYGA no: TYLY-0020
SKU: hon-10155 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, Shopfairing set street T10, NC30 kit
€707.45
This set of bodywork comprises of the parts shown in the picture which are also available separately
*A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock NC30. It uses the original stock Honda mirrors but requires the special meter and mirror stays supplied.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0092
SKU: hon-10063 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Seat set style RVF, VFR400 NC30 (no taillight holes)
€240.81
Seat Cowling (GRP), NC30, RVF Race Style, No Tail Light
RVF shape Race Seat Cowling without taillight holes. Single seat, direct replacement for use on the Honda NC30, styled the same as the RVF400 seat cowling but single seat style like the RC45.
Seat cowling support is included in kit. This seat cowling uses OEM seat pad.
Please note this product does not have taillight holes. For seat cowling with taillight holes, please order BPFT-9013.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM seat pad.
TYGA no: BPFT-9113
SKU: hon-10419 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Seat Cowling (GRP) MC18, Stock Shape, Single Seat, Race
€263.33
Seat Cowling (GRP), NSR250 MC18, Stock Shape, Single Seat, Race
This seat cowling is designed for the classic racers out there or competing in classes where you need to keep the stock silhouette. It is a full-on race version with the seat area covered over for maximum rider feedback when on the limit.
TYGA no: BPFT-0222
SKU: hon-10913 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, Shop