Exhaust stay right (tyga), Honda NSR250 MC21 – MC28
€59.59
Due to requests from customers with MC21 and MC28s wanting more support of the Tyga exhaust system when used withGP Race Tail kits, we now have this product designed to be retro fitted with our GP Race Tail kits:
BPFS-0003, BPFS-0004, BPFS-0005, BPFS-0006, BPFS-45, BPFS-0046, BPFS-0059 and BPFS-0060
The stay is provide with bushes, nuts and bolts to mount to the subframe. Note, you will need to drill the subframe TYY-0007 to install this stay and some adjustment of the seat cowling may be required.
Please note this product is ‘handed’ and you need one of each TYLY-0100L (Left) and TYLY-0100R (Right) for one bike.
TYGA no: TYLY-1100R
SKU: hon-10375 Categories: ALL products, Bodykit replacement parts, Bodywork, Exhausts, Exhausts, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon airducts (pair) satin , Honda CBR250 MC22
€317.07
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCX-7110satin
SKU: hon-11463 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersLower Triple Clamp, CNC Black, RVF400R Forks / NC30 Shaft
€367.66
Lower Triple Clamp, CNC Black, VFR400R Forks/NC30 Shaft
CNC machined TYGA lower triple clamp for the Honda VFR400R/NC30 to take RVF400/NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-MR7-003
Bearings: 91016-MR7-003
This product is also sold as part of a set
TYLY-1644 Triple Clamp Set, CNC Black,RVF400/NC35 forks to fit RVF400R/NC30.
Top triple clamp CNC black RACE, KTM RC390, 2014- 21
€442.15
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1931
SKU: ktm-10219 Categories: ALL products, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, Stock list, all modelsCarbon passenger seat cover, Honda MSX125 GROM
€185.39
Passenger Seat Cover, (Carbon), MSX125 Grom.
This is the carbon version of our MSX125 passenger seat cowling. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPFX-7128 in a variety of colour options. See website for more details.
 
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
&nbsp;
&nbsp;
&nbsp;
&nbsp;
&nbsp;
TYGA no: BPCX-7128
SKU: MSX-10145 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopMirror blanking plate silver, Honda VTR1000 SP2
€39.50
Handy mirror blanking plates for your VTR1000 SP2.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 40mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
Wheel aluminium Spacer kit, Honda MSX125 GROM
€65.23
Replace the heavy steel wheel spacers front and rear on the MSX125 Grom. At 35% of the weight of standard they’re just what you need for easier wheelies! in additon to the weight saving, they have the added feature of a lip which enables them to be retained in the wheel seal making for easy and quick wheel changes, race bike style! This kit consists of four spacers, enough for one bike.
TYGA no: TPER-0094
SKU: MSX-10083 Categories: ALL products, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopFront fender (GRP), KTM RC125/RC200/RC390
€120.42
This lightweight tough GRP front fender replaces the plastic item, and is ideal for racing where crash resistance is important.
Made from top quality epoxy resin and glass fabric, this component is both stronger and lighter than similar appearing products made using the cheaper polyester risin and chopped strand mat.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Update your bike with this great TYGA performance, KTM power part!!
Weights aprox. 400 grams.
TYGA no: BPFF-7131
SKU: ktm-10030 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, Shop