Bumb foam small,
€12.56
This foam seat bum stop is supplied with adhesive surface on back for easy and fast application. Adds the final touch to any race or race rep bike. This size is the smaller of the two versions we supply. See BPSP-0003 for larger version.
TYGA no: BPSP-0003
SKU: alg-10059 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30HEL front brake line Brembo 84mm, Honda MSX125 GROM
€76.14
Kit includes:
1x HEL Brake Line
4x Sealing Washer
1x M10x1.25 Banjo Bolt
1x M10x1.00 Banjo Bolt
45 degree banjo goes to master cylinder. 30 degree banjo goes to caliper.
Ensure Bleed nipple is at top of caliper for simple bleeding.
Route the hose through the standard brake hose retaining clips
Brembo caliper uses M10x1.00 banjo bolt. Not the same as standard Honda bolt.
TYGA no: BLSF-0010Â
SKU: MSX-10130 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsSection, Collector, Intermediate, Lower, Stainless, VFR750F, 3rd Gen, 90-93
€66.48
TYGA no: EXPT-5151
SKU: hon-11348 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Section header, front left stainless, VFR750F gen 4, 94-97
€127.68
Section, Header, Front Left, Stainless, VFR750F, Gen 4, ’94-’97
Header, Front Left, used on:
EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXPT-1119
SKU: hon-11024 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Carbon silencer guard WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0076
SKU: ktm-10201 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsWasher, Fr. Sprocket Lock, MC28
€4.00
Washer, Fr. Sprocket Lock, MC28
TYGA no: 23815-KV3-000
SKU: hon-11147 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Seat set street RC211V, NC30
€637.59
This set of bodywork is designed to replace the stock NC30 seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength as well as a pure race one without the tailight or registration/license plate holder. See:
BPFS-0027 (street carbon)
BPFS-0028 (race GRP)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0034
SKU: hon-10068 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30TYGA bike dust cover Black (street), Aprilia Racing
€63.10
Specially made for your Aprilia.
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0179
SKU: apr-10112 Categories: ALL products, Aprilia, Bike covers, Merchandise, RS125, RS250, RSV125, Shop, Universal parts, Various parts, Various parts