Bracket front brake CNC silver 40mm Brembo, Yamaha R25/ R3
€51.61
Bracket, Front Brake, 40 mm Brembo Conversion, Silver, Yamaha R25/R3
CNC machined brake caliper support for your Yamaha R25/R3.
Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your R25/R3.
Tried and tested with the standard master cylinder and standard brake lines with great performance.
For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.
Water pump shaft/gear, Honda NSR250 MC18/MC21
€255.37
Water Pump Shaft/Gear, MC18, MC21
High quality hard anodized aluminium gear, on precision ground shaft.
Manufactured by T2 Racing in Japan.
Direct replacement for the standard plastic shaft/gear which is prone to cracking and causing catastrophic failure.
The shaft and gear can be disassembled should any parts ever need replacing.
Note that this part is for MC18 and MC21 only. For MC28 please see TPER-5004
TYGA no: TPER-5003
SKU: hon-10622 Categories: ALL products, High performance, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various partsSeat cowling stock race , Suzuki RGV 250
€252.35
Seat Cowling (Race, GRP), VJ22, Stock Shape, Assy.
This seat cowling is modelled from the original stock VJ22 shape and is suitable for all race classes but particularly those where the you need to keep the stock silhouette. It is a full-on race version with the seat area covered over for maximum rider feedback when on the limit.
Note that this panel is designed to make it possible to remove the fuel tank while the seat cowling stays installed. The panel is top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer 200 gram mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
Only available as race version, no street version with light provision.
TYGA no: BPFT-9226
SKU: suz-10094 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiExhaust Chamber, Left, GP Type, Stainless Steel, RGV250, VJ22
€305.44
Bare replacement left side chamber for chamber set EXCS-0010L
Set exhaust, race system double stainless silencers oval/carbon cap , KTM RC390 2014 – 2016
€962.68
Set, Pipe, Race System, RC390, Stainless Oval/Carbon End Cap.
Update your bike with this great TYGA performance, KTM power part!!
Model 2014 – 2016
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual under seat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected than systems which have the exhaust exiting the right of the swing arm. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decibel killer for noise reduction.
Compatibility
This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0062 for similar system.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
Customization
Performance and Dynograph
Please refer to dynograph
A) All Standard.
B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map
C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map
Very useful gains especially in the mid range for both B) and C), for much stronger acceleration.
The silencer was full bore. No decibel killer used.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0061
SKU: ktm-10060 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopSection, Right #2, KTM RC390 Serpent
€129.12
Section, Right #2, KTM RC390 Serpent
TYGA no: EXPT-0057
SKU: ktm-10119 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarbon Headlight cover front, MSX125 2021
€178.27
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7548
SKU: msx-10510 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopCarbon exhaust guard TYGA, Yamaha R25 – R3
€63.97
Exhaust Guard, TYGA Slip On, Yamaha R25/R3
Made from specially formulated high temperature resin, this exhaust guard adds the finishing touches to the TYGA Performance slip-on exhaust transformation. Fits in minutes and adds a factory GP touch to your bike.
Note, this product is only suitable when used with TYGA Performance R25 and R3 slip-on exhaust systems EXPS-0059 and EXPS-0060