Triple Clamp Set, 3D, CNC Silver, CBR600RR Forks to fit MC18
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3302
SKU: hon-11268 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsCDI Zeeltronic Mito MK1
€220.00
Clutch Cable, MC21
€47.38
Clutch Cable, MC21
This clutch cable is an alternative for the Honda OE part 22870-KV3-680.
TYGA no: TYPP-0021
SKU: hon-10828 Categories: ALL products, Honda, NSR250, NSR250 MC21, Various partsCarbon Front fender, Yamaha R1 2002-8
€180.80
Lightweight carbon fibre direct replacement for Yamaha OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
TYGA no: BPCF-7002
SKU: yam-10007 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8Silencer stainless round, WSS300 (race) system, KTM RC390
€384.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0174p
SKU: ktm-10144 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarbon heel guard right, VJ22/ NC30/NC35
€37.61
This lightweight carbon heel guard can be used as a direct replacement for the heavy steel one on the VJ22 RGV250. It can also be fitted to many other models, being suitable for most models which have Nissin master cylinders with 45-49 mm. pitch mounting holes.
Note this product is not supplied with STAA-0002 and STAA-0003 step kits but it is supplied with STAA-0004. Please add this product to your cart if you require a right side carbon heel guard for the STAA-0002 and STAA-0003.
TYGA no: BPCC-9002
SKU: alg-10047 Categories: ALL products, Carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RVF400RR NC35, Shop, Suzuki, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Top Triple Clamp, CNC Black, NC35 Forks/NC30 Shaft
€196.92
Top Triple Clamp, CNC Black, NC35 Forks/NC30 Shaft
CNC designed and manufactured in house. Facilitates mounting holes for securing the ignition switch holder assy TYLY-1144
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
Section, Collector 1-2, KTM RC390 Serpent
€61.37
Section, Collector 1-2, KTM RC390 Serpent
TYGA no: EXPT-0053
SKU: ktm-10116 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all models