Carbon tank protector, Kawasaki Ninja 250/300 2013-18
€104.89
Carbon direct replacement for OEM Kawasaki item. Pre drilled for easy fitting. Compatible with:
2013- Ninja 250
2013- Z250
2013- Ninja 300
2013- Z300
TYGA no: BPCC-7032Â
SKU: kaw-10238 Categories: ALL products, Carbon, Kawasaki, Ninja 250R/300R 2013 -, ShopCarb Service Kit B, 21 pieces, Honda CB400 Super Four NC31
€40.95
Carb Service Kit B, 21 pieces, Honda CB400 Super Four NC31
LiteTek Carburettor Seal Kit to suit
Honda CB400 Super Four NC31
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x OR-016 Fuel T-Pipe O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MY9-690)
6x OR-024 Vacuum O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MY9-690)
4x OR-014 Float Vent O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MY9-690)
4x CS-005 Choke PLunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-MY9-690)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
Lower Cowling (Carbon), NC35, Stock Shape
€631.04
Stock shaped one piece lower in carbon conprising what is left right and lower part of inner cowling on OEM panels. Compatible with our stock shaped NC35 carbon upper. See also BPFS-0065, BPFS-0066, BPFS-0067 and BPFS-0068 for savings.
PLEASE ALLOW TWO WEEKS BEFORE SHIPPING. PARTS ARE MADE TO ORDER
TYGA no: BPCL-0103
SKU: hon-10841 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Passenger seat cover RC211V, CBR250RR MC22
€49.69
This stylish seat cover replaces the passenger seat pad on the MC22. Simply unbolt the original and replace with the cowling. Access to the luggage compartment is still retained.
For use with BPFT-9025 only. Not for use with stock seat cowling.
Carb Service Kit A, 32 pieces, Yamaha FZR400 1WG
€55.41
Carb Service Kit A, 32 pieces, Yamaha FZR400 1WG
LiteTek Carburettor Seal Kit to suit: Yamaha FZR400 1WG
Carburettor Model: Mikina BD32
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-004 Float Bowl Ring, Material: Flourosilicone (OE part number: 1WG-14147-00)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A ( Part of Yamaha Assembly: Part Number 12R-14105-00 )
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number:N/A)
4x OR-010 Float Needle Assy O-Ring Material: Viton 70A (Part of Yamaha Assembly: Part Number: 1HX-1410A-00-00 )
4x SR-004 Main Jet SQ ring, Material: Viton70 A (OE part number: 1AE-14227-00)
12x OR-007 Fuel Tee O-Ring, Material: Viton 70A (OE part number: N/A)
Set full race system high level with carbon silencer with carbon cap, Honda MSX125SF GROM
€519.40
Set, Pipe, Full Race System, High Level, MSX125SF Grom, Carbon Oval/Carbon End Cap. Second Generation.
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2100 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom
EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom
Note: Some modification of the stock Honda rear hugger (no modification required if using the hugger BPCH-7028 and BPCH-7128) and stock Honda rear fender is necessary to install this system
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0066
SKU: MSX-10339 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopKit, Fairing Set, NC30, Stock Shape, Painted Type 1
€979.15
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFS-0216
SKU: hon-11405 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Fairingstay stock, CBR250RR MC22
€85.34
Upper / Mirror Stay for MC22. Direct replica of the standard stay for simple replacement of bent, or old and ugly original item. Weight is comparable to standard item, but quality of welding is improved.