Silencer carbon 60mm 2 stroke
€156.20
This high quality lightweight silencer is made from CNC machined end caps joined by a carbon fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-9005 aluminium
EXSL-0004 carbon/Kevlar
If you want to fit this silencer to your 2 stroke and you don’t have a TYGA chamber, this is possible but please also order alg-10002 (tper-0022).
TYGA no: EXSL-0003
SKU: alg-10007 Categories: 2 stroke exhaust sets, ALL products, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, Shop, Suzuki RGV250Carbon Swing arm cover, Honda VFR400 NC30
€150.00
This lightweight carbon cover fits over the stock swing arm on the NC30 VFR400R.
Very popular product, many swing arms have scratches, so with this beautiful carbon product you get rid of the scratches and also get that GP look.
Update your bike with this great carbon product, direct replacement of the original part
TYGA no: BPCC-9019
SKU: hon-10312 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Carbon cover (right), (4 speed engine) Honda Monkey 125 2018- 2021
€93.94
Engine Cover (right) Carbon, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7642
SKU: msx-10429 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopCarbon chain guard Dax
€104.89
Chain Guard, (Carbon) Stock Shape, Honda Dax. Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7136
SKU: MKY-003 Categories: ALL products, By model, By product, Carbon, Dax and Chaly, Honda, ShopExhaustset stainless steel carbon silencer round, Kawasaki ZXR250
€639.76
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round carbon silencer EXSL-0032
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.P Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifold<iframe width="560" height="315" src="https://www.youtube.com/embed/z5hGKrpQ56c" frameborder="0" allowfullscreen></iframe>
TYGA no: EXPS-0015Â
SKU: kaw-10017 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopBracket rear brake CNC silver 84mm Brembo, Honda NSR250 MC28
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, MC28 and NC35. Consists of main caliper bracket and spacer for the rear disc brake to get the correct clearance.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1089)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-0089Â
SKU: hon-10431 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC28, RVF400RR NC35, ShopTop triple clamp MiniRacerXtreme, Honda MSX125 GROM
€142.25
Top Triple Clamp, MiniRacerXtreme, MSX125 Grom
TYGA no: TYLY-0105
SKU: MSX-10271 Categories: ALL products, By model, Honda, MRX, MRX, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopSilicone Hose Kit, 6 pieces, Honda CBR250RR MC22
€139.72
Silicone Hose Kit, 6 pieces, Honda CBR250RR MC22
LiteTek Silicone Hose Kit, 6 pieces, to suit Honda CBR250RR MC22
3 ply polyester reinforced
Consist of the following hoses:
1x Hose A, Water Pump Inlet (OE part nr: 19501-KAZ-000)
1x Hose B Water Pump Outlet (OE part nr: 19061-KY1-000)
1x Hose C Radiator Inlet (OE part nr: 19502-KAZ-000)
1x Hose D Engine Outlet Left (OE part nr: 19066-KAZ-000)
1x Hose E Engine Outlet Right (OE part nr: 19068-KAZ-000)
1x Hose F Hose (OE part nr: 19521-KAZ-000)
TYGA no: SHK-001-Honda-MC22
SKU: alg-10358 Categories: ALL products, Carburettor Service Kits,, CBR250RR MC22, Honda