Carbon rear hugger, Honda CBR600 2005-16
€142.48
Direct replacement for the nasty plastic hugger. Weighs a fraction of the original and makes your bike stand out from the crowd.
Please note TYGA logos are applied over the clearcoat and can easily be removed.
TYGA no: BPCH-7206
SKU: hon-10011 Categories: ALL products, Carbon, CBR600RR 2005- 6, CBR600RR 2007- 16, Honda, ShopKitaco big throttle body kit 181cc NEO
€365.21 €314.49
Kitaco big throttle body kit 181cc NEO
High performance with high quality and durability.
This kit comes complete with filter, intake manifold, brackets.
All parts you need to install it on your Honda MSX125 Grom.
This kit is specially designed for the Kitaco NEO Big bore kit.
TYGA no: 403-1432100
SKU: MSX-10372 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020 Tag: Honda MSX Kitaco NEO kit blackKit, Bodywork, GRP, stock shape, with GRP tank, NSR250 MC28, Painted Rothmans
€2,968.09
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0185
SKU: hon-10969 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersKitaco reinforced clutch springs/pressure plate, Honda MSX125 / grom
€93.48
moet nog 506
TYGA no: 307-1444600
SKU: MSX-10382 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020Tuning set CNC silver GROM
€62.96
Tuning set CNC silver GROM (msx-10158)
A set contains:
2x clutch – brake mount clamp
1x Brake reservoir cap
1x Clutch adjuster
TYGA no: special012
SKU: MSX-10158 Categories: ALL products, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsHandlebar set black, Honda CBR250 2011 – CBR300 2014
€222.93
Handlebar Set, Black, CBR250R/CBR300R.
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well with our step kit STAA-0013 putting more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
Designed to match our triple clamp (TYLY-0069 and TYLY-1069), these handlebars give the finishing touch to the cockpit area and are available in two colours, black or silver.
TYGA no: TYLY-1469
SKU: hon-10184 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, ShopUpper cowling race, Suzuki RGV 250 stock
€253.10
Upper Cowling (Race, GRP), VJ22, Stock Shape, Assy.
This upper cowling is modelled from the origial stock VJ22 shape and is suitable for all race classes but particulary those where the you need to keep the stock silhouette. Note that this panel splits the fairing into two parts for ease of removal and fitment at the race track and is to be used with BPFL-9226 lower cowling to complete the fairing. Constructed with epoxy resin and multi layer 200 gram mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
It uses stock windscreens, SCRE-0061, SCRE-0062, SCRE-0129 and SCRE-0130.
NOTE: This product is compatible with lower cowling BPFL-9226. Will not fit stock Suzuki lower cowling.
Only available as race version, no street version with light provison.
TYGA no: BPFU-9226
SKU: suz-10092 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiHandle bar set, Honda RS250 NX5
€216.82
Handlebar Set, Silver, NX5
Design based on the genuine HRC bar clamps as used on the NX5. Made from 6061-T6 for strength and durability, ideal for replacements for your Honda RS250 or for building a special. Designed for 50mm/52mm clamping surface, with an angle of the bars set at 17° This is the same as stock HRC clamps and is more radical than the usual <10° which most of our other handle bar clamps are set at. Fits Honda RS250R NX-5 and will work on any bike with 50mm which is most upside down types ( make sure to check before ordering)
TYGA no: TYLY-0159
SKU: hon-11213 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, Shop