Chain slider, RS250 NX5
€44.99
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Fuel tank asteroid black, CBR250R (2011 -13)
€259.66
This bodywork set includes all the parts needed to convert the seat cowling for the 2011-13 CBR250R to TYGA GP style. Passenger seat cover, taillight, registration illuminating light and undertray and exhaust stay are all included as well as all fitting hardware.
TYGA no: test
SKU: hon-11442 Categories: ALL products, Bodywork, Bodywork and carbon, CBR250R 2011 - 15, Honda, ShopSet exhaust, race system double maggot , KTM RC390 2014 – ’21
€866.32
.Set, Pipe, Race System, RC390, Stainless Moto MaggotUpdate your bike with this great TYGA performance, KTM power part!!.Set, Pipe, Race System, RC390, Stainless Moto MaggotModel 2017This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage. This system increases performance, saves weight and enhances the looks of the bike. The system is not supplied with decibel killers, and may not meet noise regulations in your area.CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.Please also see EXPS-0091 for similar system with oval silencersPlease refer to dynographA) All Standard.B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition mapC) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition mapVery useful gains especially in the mid range for both B) and C), for much stronger acceleration.The silencer was full bore.NEW! for the 2017 model we added the EXPT-0003:Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.Compatible with the following exhausts:Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0092
SKU: ktm-10092 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopSide cover (pair), NC30
€33.11
Side Covers in GRP for BPFT-9117
TYGA no: BPFC-9117
SKU: hon-10091 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Tankcover race front RVF, NC35
€49.73
This tank cover replaces the stock one and blanks off the air duct holes. Designed to be used with our RC211V style upper cowlings, this product can also be used with stock bodywork with no air ducts if required
TYGA no: BPFX-9001
SKU: hon-10141 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopHandle bar set black 48mm racing, Honda NSR250 MC21/MC28
€234.92
Handlebar Set, Racing, Black, 48 mm.
Designed and machined in house from aircraft grade aluminium, suitable for:
– CBR600RR
– NSR250 with CBR600RR front fork conversion. These are lower than the stock Honda OE CBR600RR bars so they are more suited to the NSR250 which requires lower bars. (For stock NSR250 41mm front end see TYLY-0077 and TYLY-1077)
– Fits most other sports bikes with 48mm. inverted front suspension.
7 degree angle for a comfortable, yet sporty feel.
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-1012
SKU: hon-10560 Categories: ALL products, CBR600RR 2007- 16, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, VFR400RR NC30Rubber ram airbox, Honda RS250 NX5
€9.13
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0221B
SKU: hon-11382 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsSection, Collector, Intermediate, Lower, Stainless, VFR750F, 3rd Gen, 90-93
€66.48
TYGA no: EXPT-5151
SKU: hon-11348 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93