Tank cover set, CBR250RR MC22
€239.46
This product is a set of two tank covers which are designed to fit over a stock MC22 CBR250RR tank to prevent or cover up accident damage to the tank for example. They use the original mounting points front and rear.
We recommend using a smear of silicone sealant where the two halves meet and round the filler cap for a secure and watertight seal
Carbon air duct (pair), NC35
€308.36
These real carbon air ducts are a direct replacement for the cheap and nasty plastic ones the bike is supplied with. Fits in a few minutes and makes a dramatic improvement to the overall appearance of the bike.
TYGA no: BPCX-0018
SKU: hon-10121 Categories: ALL products, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopDecal, Windshield, Kawasaki, black, Ninja 250R 2008 -12
€14.58
Decal, Windshield, Kawasaki, black, Ninja 250R 2008 -12
TYGA no: 56052-0154
SKU: kaw-10230 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopDecal, Side Fairing, Ninja Silver, Ninja 250R 2008 -12
€7.11
Decal, Side Fairing, Ninja Silver, Ninja 250R 2008 -12
TYGA no: 56054-0056
SKU: kaw-10191 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopCarb Service Kit A, 47pieces, Kawasaki ZXR400
€90.08
Carb Service Kit A, 35 pieces, Kawasaki ZXR400
LiteTek Carburettor Seal Kit to suit: Kawasaki ZXR400
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-005 Float Bowl Ring, Material: Flourosilicone (OE part number: 92055-1426)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (OE part number: 92055-1002)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number: 92055-1003)
4x OR-032 Float Valve O-Ring, Material: Viton 70A (OE part number: 92055-1425)
4x OR-030 Outside Fuel O-Ring, Material Viton 70A (OE part number: 92055-1004)
8x OR-031 Centre Fuel & Outside Breather O-Ring, Material: Viton 70A (OE part number: 92055-1223)
4x CS-004 Choke Plunger Cap, Material: HNBR (OE part number: 16012-1052)
3x SC-008 Throttle Synch Screws, Material Stainless Steel (OE part number: N/A)
TYGA no: CK-Kawasaki-ZXR400
SKU: alg-10345 Categories: ALL products, Carburettor Service Kits,, Kawasaki, ZXR400LSeat set with carbon street, Honda NSR250 MC28
€647.60
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0005Â
SKU: hon-10241 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC28, ShopFairing set street with air duct, Aprilia RS250
€721.75
This kit is supplied with all additional fasteners required to mount it to a stock Aprilia RS250 MKII
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You will need this to fit the lower TYGA cowling.
This kit comprises of the parts shown below which are also available separately.
* A clear screen is provided unless you specify tinted in the comment box at check out
TYGA no: BPFS-0100
SKU: apr-10034 Categories: ALL products, Aprilia, Bodywork, Bodywork and carbon, RS250, ShopFront fender (GRP), NX6 NSR500V
€102.49
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)