Tank filler cap racing , KTM/Triumph
€69.87
Tank Filler Cap, Keyless, Racing Type, KTM/Triumph
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for most KTM/Triumph sportsbike models.
Suitable for the following models:
Triumph
– Triumph Daytona 600/650 All Years
– Triumph Daytona 675 2006 – 2008
– Triumph Daytona 955i 1998 – 2000
– Triumph Daytona T595 All Years
– Triumph Speed Four 2002 – 2006
– Triumph Speed Triple 1050 2005 – 2009
– Triumph Speed Triple 955i All Years
– Triumph Sprint 1050 2005 – Present
– Triumph Sprint GT All Years-
– Triumph Street Triple 2007 – 2008
– Triumph Street Triple 675 2007 – 2008
– Triumph Street Triple R 2007 – 2008
– Triumph Tiger 1050 2006 – Present
– Triumph Tiger 800 All Years
– Triumph Tiger 800XC All Years
– Triumph TT600 All Years
KTM
– KTM Super Duke 990/990R All Years
– KTM Adventure 950 S All Years
– KTM Adventure 990 S/R All Years
Tube, Carbon, Round, 83mm x 350mm
€106.11
made from high TG resin and 2/2 weave twill carbon cloth, this replacement tube is suitable for the following TYGA Performance exhaust silencers. It is also suitable for other manufacturers’ silencers of the same dimensions. See below for exact specifications
Set upper/meter stay Race, Kawasaki Ninja 400 2018-
€292.88
Set, Upper/Meter Stay, Race, Ninja 400
This lightweight all aluminium upper cowling/meter stay replaces the big and complicated heavy steel one supplied with the bike and weighs a fraction of the original.
It is designed to be strong but minimal and supports both the fairing and instrument securely. It consists of a CNC machined aluminium clamp around the headstock and a lightweight aluminium fabricated stay which has been powdercoated for a durable finish.
It is simple and easy to install and in the event of an accident, it is easy to replace or repair. The instruments are mounted using the original stock mounts and it has a tab for holding the tipover sensor, also includes a stay to relocate the regulator.
Please note this is for circuit use only and can be installed with TYGA Performance ( BPFS-0175) or other race bodywork.
TYGA no: TYLY-0216
SKU: kaw-10153 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Exhaust Chamber, Right, Side By Side Type, Stainless Steel, MC18
€459.06
Bare replacement right side chamber for EXCS-0003
Crankshaft Bearing, B, NSR250 MC18/21/28
€106.55
Crankshaft Bearing, Right, NSR250 MC21/28
Genuine OEM KOYO main crankshaft bearing for your Honda NSR250 MC21/28.
See also TYPP-0012SET for set consisting of one each of the left, centre and right crank bearings.
TYGA no: TYPP-0012B
SKU: hon-10758 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various partsExhaustset race Stainless steel Silencer Stainless steel oval , NC30 NC35
€1,059.04
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inch internal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0017
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0012
SKU: hon-10102 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Athena gasket kit complete set, Honda NSR250 1990 – 96
€65.29
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: P400210850268
SKU: alg-10417 Categories: ALL products, High performance, High performance, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsPro arm chain, tool
€17.20
Developed in-house by TYGA Performance, this tool is the one for the job! No more skinned knuckled and gouged Pro Arm hubs. This TYGA ‘C’ spanner has been designed to give a more grippy hold on the hub when compared to other well known brands. Allows for easy chain adjustment.
TYGA no: TYTO-0027
SKU: hon-10118 Categories: 848 / 1098 / 1198, ALL products, Ducati, Honda, NSR150SP, NSR250 MC28, RVF400RR NC35, Shop, Tools, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30