Seat set RCV211 with carbon, NC30 assy
€457.28
This is the seat cowling with carbon as used in the NC30 RC211V style seat cowling kit, BPFS-0027.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPCT-9017
SKU: hon-10089 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Carb Service Kit B, 23 pieces, Honda CBR250R MC14, MC17 & MC19
€43.36
Carb Service Kit B, 23 pieces, Honda CBR250R MC14, MC17 & MC19
LiteTek Carburettor Seal Kit to suit
Honda CBR250R MC14, MC17 & MC19
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x OR-011 Float Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
6x OR-016 Fuel T-Pipe O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
6x WS-018 Vacuum Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-KT7-003)
4x CS-004 Choke Plunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-KT7-003 or 16046-KT8-003)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
TYGA no: CKB-Honda-MC19
SKU: alg-10362 Categories: ALL products, Carburettor Service Kits,, CBR250R MC19, HondaCarbon under cowling belly exhaust , Honda 1st + 2nd gen.
€289.52
Under Cowl, Belly Exhaust Type, (Carbon), MSX125 Monkey
Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Although this will fit all MSX125 Groms with stock Honda or TYGA exhausts, it was designed specifically to be compatible with low mount belly exhausts including:
– Honda low mount stock exhausts supplied with the second generation 2016 MSX125SF models
– TYGA belly exhausts EXPS-0064 and EXPS-0068 (which are suitable for all model MSX125SF Groms)
See table below for more information.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: BPCL-7328
SKU: MSX-10354 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopThrottle Cable, Close, Ninja 250R 2008 -12
€12.40
Throttle Cable, Close, Ninja 250R 2008 -12
TYGA no: 54012-0294
SKU: kaw-10208 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSeat pad, curved
€46.69
Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!
Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.
Compatible Parts:
Tyga Tail cowling: BPFT-9002, BPFT-9012, BPFT-9102 and BPFT-9112
TYGA no: BPSP-0001AÂ
SKU: alg-10080 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopAluminium fairing stay, Honda VFR400 NC30
€130.42
Direct replacement for stock item, 50% of the weight
Compatible Parts:
Upper cowlings: OEM Honda NC30, BPFU-0009, BPFU-0010, BPFU-0011, BPFU-0012, BPFU-0014, BPFU-0016 and BPFU-0020, for use with NC30 model only
Please note:
This product is designed for racing use to support the upper cowling and when used on a street use on bikes where the upper stay is needed to mount the mirrors some vibration in the mirrors will occur.
Beautiful, perfect fitment and give your bike that HRC look.
Silencer stainless round, 2" x 380mm
€230.91
Silencer, Stainless, Round, 2" x 380 mm., Assy
This silencer has polished stainless steel endcaps and a hairline finish stainless tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2" external diameter tail pipe, this silencer uses a 4" x 380 mm. outside Stainless tube.
* Please note that decibel killer model EXDK-0003 is compatible but not included with this exhaust system. Please add EXDK-0003 to your cart if you wish it to be included in your order.
TYGA no: EXSL-0079
SKU: hon-11010 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Stay C, VFR750F, 3rd Gen, 90-93
€15.90
TYGA no: BPSY-0319C
SKU: hon-11330 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93