Section Final stainless WSS300 race system, KTM RC390
€379.52
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0078
SKU: ktm-10136 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all models** special promotion** TYGA-VHM-carbon performance set, Aprilia RS125
€601.73 €541.55
Great performance set for your Aprilia RS125 (fits all 2 stroke models)
All parts shown on the picture are in the set, but the aluminium silencer is replaced with a carbon version (or carbon/kevlar)
TYGA stainless steel cone welded exhaust for maximum performance, light and beautiful carbon or carbon/kevlar TYGA silencer. For great 2 stroke sound.
If you want an aluminium silencer, please check product alg-10251.
VHM insert for good compression and best performance.
A must for every Aprilia RS125 owner, and now for an unbeatable price.
Side mount lower cowling, Honda VFR400 NC30
€9.04
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPSY-0323
SKU: hon-11390 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30Clutch Friction Plate, NSR150SP
€13.08
Clutch Friction Plate, NSR150SP
TYGA no: 22201-KW6-900
SKU: hon-11156 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR150SPTYGA bike dust cover black red Aprilia
€63.10
Specially made for your Aprilia.
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0052
SKU: apr-10085 Categories: ALL products, Aprilia, Bike covers, Merchandise, RS125, RS250, RSV125, Shop, Universal parts, Various parts, Various parts, Various partsExhaust Chamber, Left, Side By Side Type, Yamaha RD350LC
€305.87
Exhaust Chamber, Left, Side By Side Type, Yamaha RD350LC
This is the bare left side replacement chamber for EXCS-0044
TYGA no: EXCB-0044L
SKU: yam-10064 Categories: ALL products, Exhausts, RD350LC 4L0, Stock list, all modelsSection collector intermediate stainless, VFR750F gen 4, 94-97
€69.87
Section collector intermediate stainless, VFR750F gen 4, 94-97 94-97
Section collector intermediate stainless used on:
EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXPT-5119
SKU: hon-11028 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Carbon sprocket cover, Ducati monster 696/795/796/1100
€63.67
Sprocket Cover, (Carbon), Ducati Monster