Top Triple clamp CNC silver kit, Honda NSR150
€218.46
CNC machined top triple clamp with detachable ignition switch/lock holder for your NSR150SP.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-0051
SKU: hon-10282 Categories: ALL products, CNC parts, CNC parts, Honda, NSR150SP, ShopBracket front brake CNC silver 84mm Brembo, Kawasaki Ninja 400
€48.00
Bracket, Front Brake, 40 mm Brembo Conversion, Silver, Kawasaki Ninja 400
CNC machined brake caliper support for your Kawasaki Ninja 400.
Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your Ninja 400.
For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.
Torque Setting: 35Nm
TYGA no: TYLY-0210
SKU: kaw-10155 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-carbon rear hugger STD wheel, RVF400
€308.02
Rear Hugger (Carbon), RVF400 NC35, Stock Type, Assy.
New stylish design prevents water and road debris from the rear wheel reaching the rear shock and other components. Please note this model is designed specifically for the NC35 RVF400 with the stock 150/17 rear tyre fitment. Note we make similar products:
BPCH-7004, NC30 150/18 tyre size
BPCH-7024 NC35 160/17 tyre size
TYGA no: BPCH-7014
SKU: hon-10562 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopExhaustset race Stainless steel (high level) double Stainless steel Silencers, NC30 NC35
€1,276.81
This exhaust system includes everything you need to replace the stock system. It includes, stainless pipe work, twin carbon silencers, springs, gaskets, silencer clamp, mounting stay and all other mounting hardware.
This system can be used with stock Honda or Tyga bodywork/subframes
Dynograph shows totaly stock 35 compared to modded bike , twin stack tyga system, 1 layer race foam, short stacks, 125 mains front and rear, standard cdi.
TYGA no: EXPS-0158
SKU: hon-11323 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Set exhaust pipe stainless steel silencer with carbon cap , Yamaha R25/R3
€897.95
Set, Exhaust Pipe, Race System, Yamaha YZF-R25 and YZF-R3, Stainless, Stainless Silencer, Carbon End cap
This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. It uses a stainless oval silencer with carbon end cap to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatiblity
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.
Please also see EXPS-0073 EXPS-0074 and EXPS-0075 for similar system.
Performance and Dynograph
Please refer to dynographs
A) All Standard.
The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.
B) Airfilter/Airbox modification.
The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.
TYGA no: EXPS-0072
SKU: yam-10059 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Gear 2nd driven z=26 no.14, RGV250/RS250
€115.62
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Kitaco big throttle body kit 181cc NEO
€365.21 €314.49
Kitaco big throttle body kit 181cc NEO
High performance with high quality and durability.
This kit comes complete with filter, intake manifold, brackets.
All parts you need to install it on your Honda MSX125 Grom.
This kit is specially designed for the Kitaco NEO Big bore kit.
TYGA no: 403-1432100
SKU: MSX-10372 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020 Tag: Honda MSX Kitaco NEO kit blackCarbon chain guard Dax
€104.89
Chain Guard, (Carbon) Stock Shape, Honda Dax. Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7136
SKU: MKY-003 Categories: ALL products, By model, By product, Carbon, Dax and Chaly, Honda, Shop