Rr. Brake master, Rebuild Kit, MC18~28
€70.60
Rr. Brake master, Rebuild Kit, MC18~28
TYGA no: 43520-MB2-315
SKU: hon-11086 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Turn signal relay LED , 1990 Honda
€18.19
Turn Signal Relay, Replacement for Honda 1990s Type.
Electronically speed controlled flasher relay especially designed to be used with LED turn signals. This unit will flash at the correct speed regardless of the wattage of the turn signals so it can be used with stock fronts and LED rears, all LEDs or even all stock.* Easy to install, plugs and plays where the stock Honda one is installed. Re-use the stock Honda rubber sheath for mounting it.
*For some Hondas such as the MC21, NC30 and NC35, this relay works fine with 2 LED turn signals installed or with all four of the stock turn signals installed. However, if 4 LED turn signals are installed, then you need to install one of the following in the wiring harness:
TYGA no: TELC-0002
SKU: hon-10580 Categories: ALL products, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR900RR 1992- 95, Honda, NR750, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Race airbox lid, Honda NSR250 MC21/MC28
€131.29
The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.
This is the budget version in GRP. For carbon version, please also check out BPCX-9010.
TYGA no: BPFX-9010
SKU: hon-10383 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon chain guard, Cagiva Mito125/EV/SP525
€95.39
Carbon chain guard, Cagiva Mito125/EV/SP525
This carbon chain guard replaces the stock plastic part which, after 20 years, is starting to look a bit faded and battered on most Mito’s.
By replacing it with this beautiful carbon part, your swing arm will look fresh and tidy!
Lower cowling RSW, Honda NSR250 MC21/MC28
€241.68
Modelled on the RSW GP race bike design and adapted to fit the NSR250, this lower cowling represents the ultimate in fairing design for the NSR. Keeping the width to an absolute minimum, the design gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and improved design giving excellent finish both inside and out. Weight is now only approx. 1 kg but strength retained using a lip around the edge.
This product is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPFU-9012
This lower cowling is designed to be used with stock or race systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9014
SKU: hon-10238 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, By model, Carbon, Honda, NSR250 MC21, NSR250 MC28, ShopMeter Assembly, Ninja 250R 2008 -12
€239.83
Meter Assembly, Ninja 250R 2008 -12
TYGA no: 25031-0165
SKU: kaw-10217 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSeat set street with carbon RC211V, NC35
€866.99
This set of bodywork is designed to replace the stock seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the deluxe version with carbon fiber front section for added strength and enhanced looks. We also offer a budget version of the same product without the carbon, see:
BPFS-0030 (race GRP)
BPFS-0035 (street GRP)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0029
SKU: hon-10137 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopAthena gasket kit complete set, Suzuki RGV250 / Aprilia RS250
€59.00
Athena gasket kit complete set, Suzuki RGV250 / Aprilia RS250 (alg-10098)
TYGA no: P400510850255
SKU: alg-10098 Categories: ALL products, Aprilia, High performance, High performance, RGV250 VJ22, RS250, Shop, Suzuki