Rear Seat (under) T9, CBR400RR
€176.21
Rear Fender/Tail light holder/luggage compartment specially designed to be used with our RC211V style seat cowling for the NC23. This incorporates mounting points for registration/number plate and turn signals.
Carbon Lower cowling, stock shape, NXA RS250R (2001- ’08)
€524.11
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Fairing set street RC211V, CBR400RR
€1,146.55
This set of bodywork comprises of the parts below which are also available separately.
*A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock NC29.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
Carbon rear hugger, KTM RC125/RC200/RC390 2022-
€113.63
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCH-7031B
SKU: ktm-10206 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsFairing set race GP-T, Honda NSR250 MC18
€725.80
Kit, Fairing Set, GRP, (Race), MC18, GP-T
This modern fairing, designed in-house by TYGA Performance, is the culmination of many years of experience developing bodywork for the NSR250. As well as bringing the MC18 up to date, it also offers huge weight saving and easy fitment and removal. Similar to a GP bike, the fairing is held on by R clips and nylon bungs for quick release. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. This is the race version of the kit and is supplied with a race upper with no headlights.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this race fairing kit which is made using GRP (glass reinforced plastic) which is primed and ready for paint**, we also offer a street version in GRP and a street version using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0157 and BPFS-0159
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making minor adjustments before painting
TYGA no: BPFS-0158
SKU: hon-10628 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopFront Fender black, Honda MSX125 GROM
€88.02
Front Fender, Asteroid Black Metallic, MSX125 Grom
TYGA no: 61100-K26-900ZD
SKU: MSX-10097 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopKit, Fairing Set (GRP), Honda NX5 1993 RS250R (early model style)
€870.62
Kit, Fairing Set (GRP), Honda NX5 RS250R (1993 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Lower Cowling, (GRP) NX5 RS250R (1993 Style) (BPFL-9136)
The lower fairing is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9236
Seat Cowling Race (GRP) NX5 RS250R (1993 Style) (BPFT-9236)
The seat cowling is modelled off the 1993 version of the NX5 RS250R but will fit any NX5 which uses a stock subframe as far as we can tell. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
TYGA no: BPFS-0180
SKU: hon-10940 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon clutch cover, Yamaha R6 2006-12
€132.87
Carbon clutch cover
TYGA no: BPCC-7209
SKU: yam-10017 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12