Tail tidy (GRP), Honda MSX125 GROM
€153.51
This cool tail tidy, made from GRP, replaces the huge heavy one provided by Honda. At least Honda made it easy to remove theirs, and ours is quick and easy to install with no modification of components needed. Complete with license plate light and mini turn signals, harness with correct connectors and flasher relay unit to maintain the correct flashing speed. Can be used with stock or TYGA exhaust system. With the way this product transforms your bike, you’d be crazy not to install it.
demand outstrips supply, so please order early to avoid disappointment.
Please note, photos show the carbon version of this product installed on bike (BPCX7528). The two products are identical in shape but thsi one differs in that it is finished in plain flat black
TYGA no: BPFX-7528
SKU: MSX-10180 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopTYGA flywheel/RC valve remover, Honda NSR125/150/250/300
€135.99
This new, TYGA designed 2 in 1 combination tool is a flywheel puller and RC valve removing tool all in one handy package.
Saves space in your toolbox, and less clutter on the work bench.
How to use:
Familiarise yourself with the parts (see picture).
The tool is delivered ready for use as a flywheel puller. Just screw part D into the crank, then wind the (left hand) threaded main body (part A ) into the flywheel centre and pop the flywheel off by rotating part B clockwise. Part C is not used.
For removing the RC valve shaft remove part B completely and refit from the opposite end, screwing all the way home. Then slide in the part C . Position the tool over the valve shaft and wind part C onto the RC valve shaft (left hand thread). When fully home just rotate part B anti-clockwise to pull out the shaft. The RC valve shaft seal and E-clip will probably be damaged in the process, and should be replaced. Part D is not used.
22mm and 19mm spanners (not supplied) are required for correct operation.
*Note* This tool can be used on the NSR150 to remove the RC valve shaft, but will not fit the flywheel. Please use TYTO-0007 for this job.
TYGA no: TYTO-0014
SKU: hon-10329 Categories: ALL products, Honda, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Tools, Various parts, Various parts, Various parts, Various partsCarbon bracket seat, RGV250 VJ23
€73.55
Chain Guard, Rear, Carbon, RGV250 VJ23
Fits: Suzuki RGV250 VJ23
Clutch/brake mount clamp, Honda MSX125 GROM
€13.47 – €13.48
Clutch/Brake Mount Clamp), Bikers. Light weight and good looking. Anodised for a long lasting finish. Available in a variety of other colours. See photos.
This clamp is a direct replacement to the top nut on many Honda machines, such as MSX125, CBR250R MC18~28, MC19, MC22, NC23, NC29, NC30, NC35 etc
TYGA no: H052-A8Z1-0039BLACK
SKU: msx-10165- Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020Seat cowling stock shape painted RR, Honda RVF400 NC35
€419.72
Seat cowling stock shape painted RR, Honda RVF400 NC35
Stock shape seat cowling with or without taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad. Please specify if you would like taillight holes and taillight mount made for no extra charge. If we receive no comment, we will send with taillight holes and mounts.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
Painted in classic RR scheme (1994-95). This panel is finished to match the stock paintwork
TYGA no: BPFT-9004 (Painted RR)
SKU: hon-10515 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon rear hugger, Honda NSR250 MC21
€206.83
New stylish design avoids use of cable ties by using the existing mounting points on the MC21 swing arm.
This product replaces the black and carbon look GRP item we used to sell.
Update your bike with this great carbon product.
TYGA no: BPCH-0002
SKU: hon-10228 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, By model, Carbon, Honda, NSR250 MC21, Shopset, pipe full race system "no silencer" LH exit, VFR750F gen 4, 94-97
€914.49
Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-’97 (No Silencer)
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0119
SKU: hon-11014 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Under cowling “unpainted”, Honda MSX125 GROM
€204.08
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPFL-7048
SKU: msx-10475 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, Shop