Silencer oval carbon, Honda CBR500
€440.34
Silencer, Carbon, Oval/Carbon End Cap, 50.8 X 380 mm., CNC/Spring Mount, No Fittings.
The Dimensions of this silencer are as follows:
I.D. 50.8mm (slip-on section) O.D. 122mm x 90mm(diameter of stainless tube) L. 380mm Suitable for 300/500 cc medium capacity four stroke motorcycles.
TYGA no: EXSL-0043(p)
SKU: hon-10343 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, Shop, SilencersSilencer stainless steel oval (4 stroke) 2
€234.60
Silencer, Stainless, Oval, Stainless, 2″,
* Please note that decibel killer model EXDK-0003 is compatible but not included with this exhaust system. Please add EXDK-0003 to your cart if you wish it to be included in your order.
TYGA no: EXSL-0017
SKU: alg-10031 Categories: 4 stroke exhaust sets, ALL products, By model, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Carbon/kevlar Airbox , Honda RS250 NX5
€520.00
Air Box, Carbon/Kevlar, RS250, NX5
This high quality carbon/Kevlar air box is a direct replacement for the stock HRC one (80101-NX5-770) It is supplied ready to install and includes the following actual HRC or equivalent TYGA aftermarket parts:
Ref Part Number Description Qty Req
1 55204-GJ2-000 GROMMET, OIL TUBE 2
2 64234-NX5-770 SEAL,GAP 3
3 80101-NX5-770 BOX,CARBRETOR (se) 1
4 80102-NX5-770 RUBBER,BOX SIDE 2
5 80108-NX5-770 FILTER,CARB BOX 1
7 90108-GK1-000 BOLT, FLANGE SH (6×12) 2
8 90652-ND5-000 TY-WRAP (2.4×92) 5
9 90654-NX5-770 STUD, FASTENER 35 1
10 90655-NX5-770 GROMMET, FASTENER 1
11 90656-NX5-770 SPRING,FASTENER 35 1
12 90754-NX5-770 STUD, FASTENER 30 (se) 1
13 90755-NX5-770 GROMMET, FASTENER 1
14 90756-NX5-770 SPRING, FASTENER 1
15 91082-NF5-000 RIVET, BLIND (2.4×5.7) 4
TYGA no: BPCX-0004
SKU: hon-10683 Categories: ALL products, Bodywork and carbon, By model, By product, Carbon, Honda, RS250R NF5 / NX5, Shop, Various partsSeat set RVF (With taillight holes), NC35
€242.59
Stock shape seat cowling with taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad.
Please not for this product with no taillight holes, please order BPFT-9104.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
TYGA no: BPFT-9004
SKU: hon-10140 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon fuel tank, Honda NSR250 MC28
€1,444.49
Fuel Tank, Carbon, NSR250, MC28
Top quality reproduction of the steel MC28 fuel tank in carbon fiber. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
This product can be used on all MC28 model NSR250s and MC21 models if fitted with an MC28 compatible seat cowling. This means that if you have an MC21 and would like to install this tank, it is possible by installation with any of the following TYGA seat cowling sets:
BPFS-0003
BPFS-0004
BPFS-0032
BPFS-0059
BPFS-0060
BPFS-0129
BPFS-0130
BPFS-0131
TYGA no: BPCG-0001
SKU: hon-10682 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, ShopPiston Pin MC18~28
€21.90
Piston Pin MC18~28
TYGA no: 13111-KV3-771
SKU: hon-11179 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Carbon exhauststay right, Suzuki RGV 250
€29.88
Carbon Exhaust hanger stay for VJ22 RGV250. This product is used to secure the right side silencer for all types of TYGA exhaust systems for the VJ22 . It can be used with or without the passenger footpeg assembly so it is suitable for both street and race bikes.
Compatible with the following TYGA exhaust systems:
EXCS-0009
EXCS-0010
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCC-0012R
SKU: suz-10005 Categories: ALL products, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, Suzuki, Various partsSeat cowling GRP single “Street”, RC36-2 RC30 style
€384.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFT-7049
SKU: hon-11475 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist