Tankcover race front RVF, NC35
€49.73
This tank cover replaces the stock one and blanks off the air duct holes. Designed to be used with our RC211V style upper cowlings, this product can also be used with stock bodywork with no air ducts if required
TYGA no: BPFX-9001
SKU: hon-10141 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopKit, Bodywork, GRP, stock shape, with Carbon tank, NSR250 MC28, Painted Rothmans
€3,430.87
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0186
SKU: hon-10968 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersCarbon heel guards, Suzuki GSX 1000 K9-K11
€62.23
Pair of carbon fibre heel guards for the Suzuki GSXR1000 K9-K10.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
Aluminium fairing stay, Honda VFR400 NC30
€130.42
Direct replacement for stock item, 50% of the weight
Compatible Parts:
Upper cowlings: OEM Honda NC30, BPFU-0009, BPFU-0010, BPFU-0011, BPFU-0012, BPFU-0014, BPFU-0016 and BPFU-0020, for use with NC30 model only
Please note:
This product is designed for racing use to support the upper cowling and when used on a street use on bikes where the upper stay is needed to mount the mirrors some vibration in the mirrors will occur.
Beautiful, perfect fitment and give your bike that HRC look.
Carbon Frame Cover, Right, NC35
€180.64
Frame Cover, Right, (Carbon) NC35
This lightweight carbon cover fit over the frame and it is designed to protect against scratches and damage to the frame in the event of an accident
TYGA no: BPCC-7418R
SKU: hon-10745 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, Carbon, Honda, RVF400RR NC35Exhaust section, stainless steel, Honda CBR500
€87.08
Section, Final, Stainless, CBR500, suitable for our systems EXPS-0045 and EXPS-0046
TYGA no: EXPT-0041
SKU: hon-10342 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, ShopSet exhaust pipe with carbon silencer, Yamaha R25/R3
€917.05
Set, Exhaust Pipe, Race System, Yamaha R25/R3, Stainless, Round Carbon Silencer
This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. It uses a stainless oval silencer with carbon end cap to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatiblity
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.
Please also see EXPS-0072, EXPS-0074 and EXPS-0075 for similar system.
Performance and Dynograph
Please refer to dynographs
A) All Standard.
The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.
B) Airfilter/Airbox modification.
The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.
TYGA no: EXPS-0073
SKU: yam-10060 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Aluminium meterstay, Honda RVF400 NC35
€216.94
Direct replacement of the stock item. Fabricated from aluminium alloy, this Tyga Lyte product weighs approx. 200g. and can be used with all other NC35 components and fairings except the Tyga RC211V style uppers, BPFU-0018 and BPFU-0020.
TYGA no: TYLY-0017
SKU: hon-10154 Categories: ALL products, Bodywork, Honda, RVF400RR NC35, Shop, Various parts