Lower cowling GP-T, Honda RVF400 NC35
€216.35
Lower Cowling (GRP), NC35 GP-T, Assy.
This product is designed to be used with BPFU-9034 as part of the Bodywork set BPFS-0145
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9134.
Compatible products:
This product must be used with BPFU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
TYGA no: BPFC-0038 painted
SKU: hon-10598 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35Seat set street GRP GP-T, Honda NSR250 MC21
€846.53
Kit, Seat Set, GRP (Street), MC21 GP-T
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC21 but also an MC28 fitted with an MC21 fuel tank. The kit comprises parts shown below which are also available separately.
Note there are 4 MC21 GT-T seat cowling kits to choose from:
BPFS-0129 Street GRP
BPFS-0130 Race GRP
BPFS-0131 Street Carbon
BPFS-0132 Race Carbon
TYGA no: BPFS-0129
SKU: hon-10456 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopHolder, Fork, 41mm
€35.93
This 41mm fork holding tool is very useful when servicing 41mm forks. Now there’s no need for alloy jaws in your vice and less chance of crushing a fork leg.
This handy tool just slips over the stanchion, secures with an M8 cap head bolt and then can be held firmly in the vice while you painlessly perform your maintenance.
Manufactured from 6063 aluminium to ensure no damage to your motorcycle parts in normal use
Triple clamp set CNC silver, Suzuki RGV 250
€577.21
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
TYGA no: TYLY-0246
SKU: suz-10022 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiCarbon dash panels (pair), Kawaskai ZX10R 2011-13
€244.86
High quality carbon products, perfect fitment and easy to install. Gives your bike that SBK look
Lightweight carbon fibre direct replacement for Kawasaki OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
Side Cowling, Left, Race, Carbon Clearcoated, KTM RC390 WSS300
€454.95
Side Cowling, left, Race, Carbon Clearcoated KTM RC390 WSS300
Replacement Side Cowling, Left, GRP, Race, WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFU-7331R (GRP)
BPCU-7331UR (Carbon Unpolished)
Lower cowling-brakeswitchstay right
€22.85
Lower right cowl stay and brake switch stay set. Used with TYGA step kit STAA-0006.
TYGA no: BPSY-0076
SKU: apr-10029 Categories: ALL products, Aprilia, Bodykit replacement parts, CNC parts, RS250, ShopExhaustset stainless steel carbon silencer round, Honda CBR150
€520.76
This full race system has been specifically designed for the CBR150 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves 4.8 kg in weight (TYGA system 1.4 kg, stock system 6.2 kg!) and enhances the looks of the bike. Sounds great too!
TYGA no: EXPS-0008Â
SKU: hon-10286 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, Exhausts, Honda, Shop