Shroud right black, Honda MSX125 GROM
€32.45
Shroud right black, Honda MSX125 GROM (msx-10016)
OEM Honda part
TYGA no: 83480-K26-900ZD
SKU: MSX-10016 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopCarbon airduct trim cover (pair), Honda MSX125SF GROM
€57.13
Air Duct Trim Covers, Pair (Carbon) MSX125SF
Carbon air duct trim to decorate your MSX125 Grom. Precision molded, these fit over the stock plastic stock items and transforms the appearance of your bike. Install with double sided tape provided or with silicone sealant for a really permanent installation.
TYGA no: BPCC-7328
SKU: MSX-10393 Categories: ALL products, Bodywork and carbon, Carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020Handle bar clamp pair ” hinge type” black, KTM RC390 2014 -25
€205.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1731
SKU: ktm-10214 Categories: ALL products, CNC parts, CNC parts, CNC parts, Exhausts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsUpper stay, Tyga Gp MC18/MC21/MC28
€70.24
Lightweight GP style upper stay to use on the GP style fairing
Compatible Parts
Upper cowlings, BPFU-0004, BPFU-0005, BPFU-0015 and BPFU-9012. For use with MC18, MC21 and MC28 models only
TYGA no: TYLY-0001
SKU: hon-10253 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopThrottle Cable B, MC28
€68.78
Throttle Cable B, MC28
TYGA no: 17920-KV3-950
SKU: hon-11164 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Passenger seat cover red/flad black, Honda MSX125 GROM
€132.00
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in red with flat black number board as shown in the photos. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 R/F
SKU: MSX-10149 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopPowervalve cover red, RGV250 / RS250
€120.45
These 6061 T6 aluminium TYGA exhaust valve covers offer a great engine cosmetic enhancement, and also serve the function of keeping your valve chamber area free from exhaust goo.
The residue oil is allowed to blow off into separate catch tanks.
Sealing of the cover to the cylinder is taken care of by a CNC machined groove fitted with an ‘o’ ring, so no more broken gaskets. Secured in place with smart looking button head M5 stainless steel socket bolts.
This kit includes the following parts:
2x Covers
2x O-rings (fitted)
8x M5 Button head bolts
2x Hose
1x Catch bottle
Cable ties
TYGA Performance aftermarket parts are of high quality and let your bike stand out from the crowd.
TYGA no: TYLY-0039
SKU: alg-10044 Categories: ALL products, Aprilia, CNC parts, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Various parts, Various parts, Various partsCarbon chain guard, KTM Duke 125/200/390
€115.38
This chain guard replaces the nasty plastic item, adds class to your ride and is an easy installation.
Update your bike with this beautiful carbon product, same shape as original. Fits in minutes.